GT class--buggy-based on road!
12-08-2008, 01:03 PM
#1666
From what I can see.. I love that track!! Any photos of the entire layout?
12-08-2008, 01:44 PM
#1667
Tech Addict
MikaR:
for the moment, no rigid rules.
If you have an IGT (or another RTR Car) with 2 speeds and pull start engine, you can compet.
But, versus RG cars, RTR cars have no luck to win...
Zootcapri:
here's my track.
http://www.rctech.net/forum/nitro-ro...ck-france.html
for the moment, no rigid rules.
If you have an IGT (or another RTR Car) with 2 speeds and pull start engine, you can compet.
But, versus RG cars, RTR cars have no luck to win...
Zootcapri:
here's my track.
http://www.rctech.net/forum/nitro-ro...ck-france.html
12-08-2008, 02:24 PM
#1668
Very, very nice facility...
12-08-2008, 04:21 PM
#1669
You do not have to cut the SG crankshaft.
If you use the Kyosho engine mount and plate and the Kyosho clutch bell the pinions will line up with the stock transmission spur gears
Kyosho Stock engine mount KYOIF108
Kyosho Stock engine mount plates KYOIF107.
I mounted and raced with a stock Ofna .28 engine in this configuration.
If you use the Kyosho engine mount and plate and the Kyosho clutch bell the pinions will line up with the stock transmission spur gears
Kyosho Stock engine mount KYOIF108
Kyosho Stock engine mount plates KYOIF107.
I mounted and raced with a stock Ofna .28 engine in this configuration.
12-08-2008, 10:11 PM
#1670
the clutch bell is the version with standar bearings, no needle bearings anymore.
12-08-2008, 10:12 PM
#1671
MikaR:
for the moment, no rigid rules.
If you have an IGT (or another RTR Car) with 2 speeds and pull start engine, you can compet.
But, versus RG cars, RTR cars have no luck to win...
Zootcapri:
here's my track.
http://www.rctech.net/forum/nitro-ro...ck-france.html
for the moment, no rigid rules.
If you have an IGT (or another RTR Car) with 2 speeds and pull start engine, you can compet.
But, versus RG cars, RTR cars have no luck to win...
Zootcapri:
here's my track.
http://www.rctech.net/forum/nitro-ro...ck-france.html
has anyone driven the new GT2 RTR yet against your high €€ engines?
12-08-2008, 10:36 PM
#1672
Tech Addict
Hello MikaR:
No IGT or IGT2 for the moment.
Next race, probably the new IGT2 in kit with the sirio .24 engine will be available in France...
The big advantage of the challenge, I give the tyres for the race, It's included in the 20€ registration. Each driver run with the same tyres.
It's not the best tyres, but with them, it's not necessary to have the best car or the best engine, but for sure you need the best driving skills to make the difference.
Au revoir
No IGT or IGT2 for the moment.
Next race, probably the new IGT2 in kit with the sirio .24 engine will be available in France...
The big advantage of the challenge, I give the tyres for the race, It's included in the 20€ registration. Each driver run with the same tyres.
It's not the best tyres, but with them, it's not necessary to have the best car or the best engine, but for sure you need the best driving skills to make the difference.
Au revoir
12-10-2008, 04:29 AM
#1673
Tech Addict
Hello from France,
Here's the first pictures of the race:
http://www.automodelisme.com/index.p...=244&Itemid=19
More to come..
Here's the first pictures of the race:
http://www.automodelisme.com/index.p...=244&Itemid=19
More to come..
12-10-2008, 08:52 AM
#1675
Tech Fanatic
iTrader: (5)
Hello MikaR:
No IGT or IGT2 for the moment.
Next race, probably the new IGT2 in kit with the sirio .24 engine will be available in France...
The big advantage of the challenge, I give the tyres for the race, It's included in the 20€ registration. Each driver run with the same tyres.
It's not the best tyres, but with them, it's not necessary to have the best car or the best engine, but for sure you need the best driving skills to make the difference.
Au revoir
No IGT or IGT2 for the moment.
Next race, probably the new IGT2 in kit with the sirio .24 engine will be available in France...
The big advantage of the challenge, I give the tyres for the race, It's included in the 20€ registration. Each driver run with the same tyres.
It's not the best tyres, but with them, it's not necessary to have the best car or the best engine, but for sure you need the best driving skills to make the difference.
Au revoir
Romuald
I see in the photos a Blade RX1, How about a BMT 081?
Last edited by vadn1; 12-10-2008 at 09:06 AM.
12-10-2008, 06:39 PM
#1676
12-11-2008, 08:10 AM
#1677
Tech Regular
Hi,
any feed back on the OFNA DM-1 SPEC???
looks like an interesting car, and have parts from the Jammin, I think is base on that car, with some changes
thanks for your help and looking forward for the comments,
remember HAVE FUN!!!
any feed back on the OFNA DM-1 SPEC???
looks like an interesting car, and have parts from the Jammin, I think is base on that car, with some changes
thanks for your help and looking forward for the comments,
remember HAVE FUN!!!
12-11-2008, 09:03 AM
#1678
Tech Adept
The DM-one Spec is a good solid car. Very reliable
Last edited by D Starks; 12-11-2008 at 09:37 AM.
12-11-2008, 09:21 AM
#1679
Tech Master
iTrader: (26)
Join Date: Dec 2005
Location: (Holiday, Fl.) (CST.Allentown, Pa.)
Posts: 1,314
Trader Rating: 26 (100%+)
12-11-2008, 12:09 PM
#1680
I would like to see the Mazda 6.