295LikesTamiya mini cooper
03-04-2008 | 09:36 PM
#6286
Was thinking price had something to do with it? But was'nt sure.
03-04-2008 | 10:00 PM
#6287
Tech Adept
Joined: Nov 2006
Posts: 118
From: McKinney, TX
I noticed the Exige says it runs brushless motors that are both sensored and sensorless. When it runs a sensored motor does it run it in sensored mode? Or is the Exige just a sensorless ESC that runs both sensored and sensorless motors?
I guess what I am trying to ask is does the Exige run a sensor wire?
03-04-2008 | 10:25 PM
#6288
EXIGE SPEEDIE
Spoook,
The Exige system does not run a sensor wire.
As you stated "the Exige is just a sensorless ESC that runs both sensored and sensorless motors".
The Exige has the three motor leads coming from one end of the speedie and the power leads and RX leads from the other end.
Hope this helps.
Later
Calvin.
The Exige system does not run a sensor wire.
As you stated "the Exige is just a sensorless ESC that runs both sensored and sensorless motors".
The Exige has the three motor leads coming from one end of the speedie and the power leads and RX leads from the other end.
Hope this helps.
Later
Calvin.
)
03-05-2008 | 05:40 AM
#6290
Tech Master
Joined: Feb 2005
Posts: 1,485
From: Madphis, Tn.
Drifting101:
I believe the answer to your question is:
http://www.rc-mini.net
THE online source for ALL your Mini info. Everything you need to know about Minis, all in one place.
I believe the answer to your question is:
http://www.rc-mini.net
THE online source for ALL your Mini info. Everything you need to know about Minis, all in one place.
03-05-2008 | 07:01 AM
#6291
Tech Adept
Joined: Nov 2006
Posts: 118
From: McKinney, TX
Spoook,
The Exige system does not run a sensor wire.
As you stated "the Exige is just a sensorless ESC that runs both sensored and sensorless motors".
The Exige has the three motor leads coming from one end of the speedie and the power leads and RX leads from the other end.
Hope this helps.
Later
Calvin.
The Exige system does not run a sensor wire.
As you stated "the Exige is just a sensorless ESC that runs both sensored and sensorless motors".
The Exige has the three motor leads coming from one end of the speedie and the power leads and RX leads from the other end.
Hope this helps.
Later
Calvin.
That answered my question perfectly.
03-05-2008 | 08:33 PM
#6293
03-06-2008 | 12:01 AM
#6295
Tech Master
iTrader: (22)
Joined: Mar 2006
Posts: 1,387
From: Townsville
Yeh there is. I am learning about my m03 and this thread is a great source of knowledge. If it stays visible, there will be a better chance of others, both newbees and old hands asking questions and giving answers to things I might not know nor think to ask. I would rather find possible problems before they cause me trouble. I am sure there are others that would agree.
03-06-2008 | 02:08 AM
#6299
Yeh there is. I am learning about my m03 and this thread is a great source of knowledge. If it stays visible, there will be a better chance of others, both newbees and old hands asking questions and giving answers to things I might not know nor think to ask. I would rather find possible problems before they cause me trouble. I am sure there are others that would agree.
Peace Aaron(W-W)
03-06-2008 | 03:27 AM
#6300
Why don't you post some useful information or general talk.
It just irritates me the amount of thread bumping on this forum.
Bump!
(for w-w). Anyone got any updates on when type-A slicks will be available again? Champ told me end of March, but they also told me that Tamiya are looking for someone else to do their tyres because the price has just increased from their current supplier. So who knows.