Mugen Ninja .12 Glowplug
#1
Many people have told me that the Mugen Ninja .12 T01A can use only ninja glowplugs which are hard for me to find localy. Is there a different glow plug that can be used with this motor(like the Novarossi plugs)? People have told me that when they use different glow plugs, it causes leaks at the button.Can i change the button to use nova plugs? Will this change the performance? THANKS!
#2
I can tell you that the Ninja glowplug is a wider taper than the Novarossi, and it will leave a small gap between the button and glowplug if you use the Nova plugs. I can only say to remove the button and try an O.S. turbo plug or O'Donnells and see if it is the correct size, since I know that the O.S. is a large taper glowplug. This is one of downsides of the Ninja engines, is you're stuck with their glowplugs and they are not cheap buying them in a single pack either.
Last edited by ezveedub; 12-26-2007 at 01:32 AM.
#4
#9
#13
Tech Fanatic
iTrader: (6)
Joined: Feb 2007
Posts: 923
sorry to bump a old thread up,
asking for a mate who also runs a ninja but having problems finding glowplugs?
what glowplug is ran on the ninja? (5 or 6?) 5 = hot, 6 = medium. i can find the ninja 6 plugs.. but cannot find the 5.
will be running the 6 be ok with 16% nitro?
asking for a mate who also runs a ninja but having problems finding glowplugs?
what glowplug is ran on the ninja? (5 or 6?) 5 = hot, 6 = medium. i can find the ninja 6 plugs.. but cannot find the 5.
will be running the 6 be ok with 16% nitro?





