Community
Wiki Posts
Search
Like Tree195Likes

Novarossi engines thread

Thread Tools
 
Search this Thread
 
Old 12-23-2007 | 10:19 PM
  #2461  
ezveedub's Avatar
Tech Elite
iTrader: (18)
 
Joined: Aug 2004
Posts: 2,432
From: Fort Lauderdale, FL
Default

Originally Posted by dgraham225
yea, i know what you mean, thats the first time ive removed the head and now i see what the motors been through. do you think its salvageable at all? i may order a new motor and keep this one for a last resort spare, LOL! any suggestions guys?
Well, if the rest of the engine is shot (rod, bearings), you'll need to dump some money into it unless you can find some deals. Always teardown an engine you get used to inspect for any damage before you run it. If it needs just a the P/S. it could be worth repairing, depending on how much you already spent on it. PM me if you need some help.
ezveedub is offline  
Old 12-24-2007 | 03:56 AM
  #2462  
twiggy's Avatar
Tech Addict
iTrader: (2)
 
Joined: Jan 2007
Posts: 710
From: sydney, australia
Default

does anyone know the part# for ns21p
-R4 rod
-front and rear bearing?



thanks
twiggy is offline  
Old 12-24-2007 | 05:36 AM
  #2463  
KREATOR1's Avatar
Tech Master
iTrader: (8)
 
Joined: Sep 2003
Posts: 1,731
From: Malaysia
Default

Hi guys,

may i know what NSR type is this?
Attached Thumbnails Novarossi engines thread-novarosi-rs4-3.jpg  
KREATOR1 is offline  
Old 12-24-2007 | 07:12 AM
  #2464  
cdelong's Avatar
Tech Master
iTrader: (12)
 
Joined: Jul 2004
Posts: 1,805
From: The Sunshine State
Default

Originally Posted by twiggy
does anyone know the part# for ns21p
-R4 rod
-front and rear bearing?



thanks
#7006 (R4) or #7007 (R5) rods would work just fine.

Bearings should be in the exploded diagram..... #17003 for front and #16000 for the rear. It uses the same block as the 321P engines. I have put NS21P guts in a 321P block and everything fits just fine.
cdelong is offline  
Old 12-24-2007 | 10:27 PM
  #2465  
twiggy's Avatar
Tech Addict
iTrader: (2)
 
Joined: Jan 2007
Posts: 710
From: sydney, australia
Default

Originally Posted by cdelong
#7006 (R4) or #7007 (R5) rods would work just fine.

Bearings should be in the exploded diagram..... #17003 for front and #16000 for the rear. It uses the same block as the 321P engines. I have put NS21P guts in a 321P block and everything fits just fine.

thanks!!
twiggy is offline  
Old 12-24-2007 | 11:32 PM
  #2466  
Serpent-Dan's Avatar
Tech Elite
iTrader: (18)
 
Joined: Dec 2007
Posts: 2,990
From: Florida
Default

That seems to be a 5 port motor outlaw
Serpent-Dan is offline  
Old 12-27-2007 | 02:32 AM
  #2467  
Suspended
 
Joined: May 2004
Posts: 42
Default

Hello Novarossi users and experts , I need some information and advice about this engines , 353 and 359 , also the other engine that comes with it . Is it worth it or rubbish? I need to get a new engines for next season.. im an ex-novarossi user but now im considering going back on using them again . Thanks in advance...
Bokies is offline  
Old 12-27-2007 | 03:42 AM
  #2468  
German Muscle's Avatar
Tech Addict
iTrader: (8)
 
Joined: May 2006
Posts: 557
Default

Originally Posted by Bokies
Hello Novarossi users and experts , I need some information and advice about this engines , 353 and 359 , also the other engine that comes with it . Is it worth it or rubbish? I need to get a new engines for next season.. im an ex-novarossi user but now im considering going back on using them again . Thanks in advance...
XRC just did an X-Dyno test and review on the 353 in thier feb 2007 issue.
German Muscle is offline  
Old 12-27-2007 | 07:08 AM
  #2469  
Tech Elite
 
Joined: May 2005
Posts: 2,433
From: Miami, Fl.
Default

I love my 353's They are awesome.

DJ Apolaro
dj apolaro is offline  
Old 12-27-2007 | 07:17 AM
  #2470  
Tech Rookie
 
Joined: Jun 2006
Posts: 7
Default

Originally Posted by dj apolaro
I love my 353's They are awesome.

DJ Apolaro
Which is basically the difference between a 353 and plus 12-3 sct?
Alambrito is offline  
Old 12-27-2007 | 07:26 AM
  #2471  
Tech Elite
 
Joined: May 2005
Posts: 2,433
From: Miami, Fl.
Default

From what I have noticed the 353 has a higher rpm range and has a smoother power band. The 12 plus has more torque and is better on smaller tracks that need bottom and mid range. I think the 353 is easier to drive for the person that likes a smooth power band.
dj apolaro is offline  
Old 12-27-2007 | 09:00 AM
  #2472  
Suspended
 
Joined: May 2004
Posts: 42
Default

Originally Posted by dj apolaro
From what I have noticed the 353 has a higher rpm range and has a smoother power band. The 12 plus has more torque and is better on smaller tracks that need bottom and mid range. I think the 353 is easier to drive for the person that likes a smooth power band.



C'mon DJ you can do better than that , i know that your one of the top driver and expert in your country so please tell me more about this engines. I was really looking at the JP eagle .12 and the Eagle .21 but my supplier won't be able to get one for 6 weeks but the 353 and 359 are already available. Not alot of people use Nova and JP in my area , i used to run JP FX21-03 and Plus 12-3CT. I wasnt that impress with the Plus12 . Also what about the Practice engines that comes with it ? are they OK or Rubbish? Thanks .
Bokies is offline  
Old 12-27-2007 | 03:29 PM
  #2473  
Tech Elite
 
Joined: May 2005
Posts: 2,433
From: Miami, Fl.
Default

Originally Posted by Bokies
C'mon DJ you can do better than that , i know that your one of the top driver and expert in your country so please tell me more about this engines. I was really looking at the JP eagle .12 and the Eagle .21 but my supplier won't be able to get one for 6 weeks but the 353 and 359 are already available. Not alot of people use Nova and JP in my area , i used to run JP FX21-03 and Plus 12-3CT. I wasnt that impress with the Plus12 . Also what about the Practice engines that comes with it ? are they OK or Rubbish? Thanks .

I have not ever seen the sedan extra motor run, but the 1/8 motor yes. It is good for club level events, but thats it. It helps save the main motor. I was shocked that you were not happy with the 12 plus. Everyone one I know at the florida level is very happy with theirs. The last JP I had was 2 years ago and I did not like it. I excepted more for my money. It was slower and did not hold a tune than a stock mugen x12(at that time). For any motor remember that pipe and header are very important. I went from picco based motors to the nova line and I have been very happy.

DJ Apolaro
dj apolaro is offline  
Old 01-01-2008 | 01:46 PM
  #2474  
jeff1's Avatar
Tech Regular
 
Joined: Oct 2004
Posts: 378
Default

Hello racers

what is the head clearance (shims) of 35PLUS21LCE for 25% and 30% nitro?
jeff1 is offline  
Old 01-01-2008 | 07:27 PM
  #2475  
jeff1's Avatar
Tech Regular
 
Joined: Oct 2004
Posts: 378
Default

It will be good to know factory settings for the carb
jeff
jeff1 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.