ya idono.

start with something close to this:
Front end:
.020 front springs
5 degree reactive blks
middle caster
1.5 deg camber
SERVO CENTERED IN CRC MOUNTS! jr fits best

Rear end:
.075 bar
CRC white tube lube
green shock spring w/30wt oil
1mm rear droop

Tires...start with Majenta rears and Purple or Majenta fronts...only sauce inside half of front tire....3.5mm ride hight

let me know what wheel you are running and we will talk tire size...

good luck!

thanks Sean, I'll give that a try!

oh yah...just a reminder....this setup is for a fiber t-bar(non side-spring) setup...and I would tape the cells in if I was you...the battery straps just make me nervous for a couple of reasons...

fiberglass t-bar or carbon-fiber? I've got a .075 and a .076 fiberglass t-bar, and yeah, I'm into taping the batteries in.

Could you share with us the JR servo number??

What other servo is suitable and convinient?? Fast, fast servo!!

Are those low profile servos from Futaba and KOPropo suitable for this car??
Specially considering using only four cells... receiver packs are not allowed in our little club...

Thanks!!

JR 3550
JR 3650 Digital
JR DS3400G Digital Heli Tail

The Heli servo is in my car now...its a little faster that the other 2...

Thanks for your reply!!

I use a 3650 Digital and it works really well, I have never heard of anyone using the JR DS3400G Heli Tail servo in a 12th scale car...thats interesting..

the 3400G has a faster/more precise motor in it....but its in the same case as the other servos(3650)

and many top pros have used heli versions in their touring cars for the last few years...

the 3650 is what I have used for years, until now...

The Jr DS3400G digitail is a good choice. That is what I have put in my last two 1:12th scale cars. It works great.

Wes

Thanks Maybell I will have to check into it.