2991Likes1/12 forum
12-13-2006 | 10:50 AM
What sort of rollouts are people using on a small/medium carpet track with the Novak 13.5 stock brushless? Also, what spur are you using to achieve this ratio? I'm going to be getting setup shortly.
12-13-2006 | 11:03 AM
Tech Elite
Joined: Dec 2002
Posts: 2,192
From: San Francisco
Originally Posted by dr_hfuhuhurr
What sort of rollouts are people using on a small/medium carpet track with the Novak 13.5 stock brushless? Also, what spur are you using to achieve this ratio? I'm going to be getting setup shortly.
12-13-2006 | 11:22 AM
On sedans the guys testing 13.5 with sintered rotors are running roll outs at high as 1.58 
With a sintered rotor you can disconnect the blue wire on the sensor loop and run the motor up to 200deg F safely.
I think roll outs in the 50mm (2.0") or even taller range would be fine in 1/12th car with a 13.5 and sintered rotor.
FYI, you will be out running 19T 1/12 cars at those ratios
With a sintered rotor you can disconnect the blue wire on the sensor loop and run the motor up to 200deg F safely.
I think roll outs in the 50mm (2.0") or even taller range would be fine in 1/12th car with a 13.5 and sintered rotor.
FYI, you will be out running 19T 1/12 cars at those ratios
12-13-2006 | 11:34 AM
Originally Posted by dr_hfuhuhurr
What sort of rollouts are people using on a small/medium carpet track with the Novak 13.5 stock brushless? Also, what spur are you using to achieve this ratio? I'm going to be getting setup shortly.
12-13-2006 | 11:35 AM
Tech Elite
Joined: Dec 2002
Posts: 2,192
From: San Francisco
Originally Posted by dr_hfuhuhurr
WOW! Really that high? I was running a 1.8" rollout this weekend with an XStock. That's only about a 45mm rollout.
12-13-2006 | 12:28 PM
Tech Elite
Joined: Dec 2002
Posts: 2,192
From: San Francisco
Originally Posted by Marcos.J
actually i ran mine with a 83 spur with a 67mm rollout (sintered rotor) ,i could gone up but i had the biggest pinion that i could fit in, i need it to go to a smaller spur!!
What you need is my new OD Racing Products Spur Gear Adapter! It allows you to mount a spur gear to the pinion shaft, achieving ratios of under 1:1. This will give you roll outs around a Kazillion.
Last edited by odpurple; 09-12-2008 at 12:48 AM.
12-13-2006 | 12:31 PM
Originally Posted by odpurple
Marcos,
What you need is my new OD Racing Products Spur Gear Adapter! It allows you to mount a spur gear to the pinion shaft, achieving ratios of under 1:1. This will give you roll outs around a Kazillion.
What you need is my new OD Racing Products Spur Gear Adapter! It allows you to mount a spur gear to the pinion shaft, achieving ratios of under 1:1. This will give you roll outs around a Kazillion.
12-13-2006 | 02:38 PM
Originally Posted by gonzo416
some more questions:
is this going to be a carpet car?
any updated pics?
price and release date?
is this going to be a carpet car?
any updated pics?
price and release date?
the car has now been tested on carpet and asphalt with excelent results.i am working on the final version now and will have updated pics shortly.i am shooting for a 200 dollar price tag for the full car and i am also hoping to have the first batch finished and ready for delivery in january.