There is no way to shorten your shocks with reverseable modifications. One easiers way is to cut your springs and shorten them, by doing this along will lower your truck already.

However must be very careful with the rate of springs you are using to lower your truck. If you are using the original RED color ones, its a no no cos they are too soft. YOu might have the performance you need for jumps, humps and bumps.

I would suggest use 4 purple color spring and matching 4 original RED springs. Cut them by 3 to 4 rings, and you should be able to acheived your desire road height.

Cheers

Oh, another way is to get yourself the SAVAGE Aluminium threaded shocks. Those shocks comes with adjustable height, so by using the correct springs or you cut your springs, it will definitely give you the correct ride height.

Here are the picts of my SAVAGE shocks, using the orignal RED springs.





Cheers

Guys do now what cvds I can use with esavage? The plastic driveshaft just gave up one piece twisted and broke, will cvds for tmaxx 2.5 fit? Tnx

Heres some nice hop ups. I had a Savage built with almost all there parts
http://www.gcmachine.ca/index.php/rcstuff/index
It was pretty much a flux after all the upgrades where done