Go Back  R/C Tech Forums > International Forums > Australian Racing
Which Brushless System? >

Which Brushless System?

Community
Wiki Posts
Search

Which Brushless System?

Thread Tools
 
Search this Thread
 
Old 07-11-2006 | 02:42 AM
  #16  
Tech Regular
iTrader: (8)
 
Joined: Feb 2005
Posts: 391
From: Brisbane, Qld
Default

One of this countries best for quite a few years Scott. Wish you could make it back mate. Come down for a race, I will throw you one of my cars to use anyday mate. Lets see if you can remember how. Don't mind sitting out a couple of races to watch a good old Guyatt/S & D Perry Mod Final. Been a while since i saw one of those. Be great to watch.
FatIdiotRacing is offline  
Old 07-11-2006 | 02:45 AM
  #17  
Tech Regular
iTrader: (8)
 
Joined: Feb 2005
Posts: 391
From: Brisbane, Qld
Default

Its not just brushes 99ninety,

Constant truing of your comm will wear that out too. Then a new armature is required. They arent cheap. And imagine the beautiful feeling of not having to worrying about retruing your comm before the next heat at a big meeting. Mmmmmmm, just sit back and have a Coke Zero and a cucumber sandwich.

Total bliss. I will have 2 5.5 Novaks please
FatIdiotRacing is offline  
Old 07-11-2006 | 02:57 AM
  #18  
M.J's Avatar
M.J
Thread Starter
Tech Regular
iTrader: (3)
 
Joined: Jan 2005
Posts: 262
From: Perth, Australia
Default

has anyone tried a sphere competition how are they for offroad i heard a rumour that they work better in offroad than a GTB.

Opinions?
M.J is offline  
Old 07-11-2006 | 03:01 AM
  #19  
Tech Rookie
 
Joined: May 2006
Posts: 12
Default

seems true that but i am not that serious to true my com every race and i seem to still have speed and do alright.I think i need to get one and just test it out see how long it does perform for.i have to say to that brushless motors do seem to get of the line a little better in offroad i have heard that a lot of no limit and brushless speed controllers cant handle some of the new motors.
they seem good tho i will have to investigate more.
99ninety is offline  
Old 07-11-2006 | 05:57 AM
  #20  
tony2's Avatar
Tech Master
iTrader: (1)
 
Joined: Jan 2005
Posts: 1,510
From: Newcastle, Australia
Default

Originally Posted by FatIdiotRacing
No Bottom End Torque???? Have you even seen a buggy running a brushless system? I saw two B4's running around a track in QLD on Saturday WHEELSTANDING out of corners. I am buying two systems because of it.
I mean WOW

ahh yeah i have, i have tested them. it isnt hard to get a 2wd to wheelstand, but it isnt fast, if the slipper it set properly they shouldnt wheel stand.

thats great that your getting a brushless system, try it by all means, then put in a brushed motor and feel the difference..... let us know
tony2 is offline  
Old 07-11-2006 | 12:38 PM
  #21  
Tech Master
 
Joined: Jan 2003
Posts: 1,296
From: NSW Australia
Default

M.J - I assume you need a legal system? I am gong the Mamba Max. The combo deal motor has a 540 rotor (woohoo go the torque) so it is illegal but the ESC may interest you. Its just been released so no reports on how well it runs other motors yet. It has a usb port that you can upgade the firmware on it, I have used this feature before on the Mamba 25 and performance increased

If I need to go legal I'll have to get a legal brushless (or brushed urrghh yuck) motor. The Mamba Max ESC runs the 3 types of motors, sensorless, sensored and brushed.

tony2 - I've only had the Mamba 25 but its nothing like the no bottom end "switch" system you state brushless are.

re: slipper, so what your saying is if you have the slipper set up correctly you wouldn't notice if it was brushed or brushless as both would be slipping .

The mamba 25 sold me on brushless. If there is enough traction it flips the RC18 (no slipper) if I nail it. I have been waiting some time for its big brother and its finally out - I'll be ordering a Mamba Max soon .
au_Nightmare is offline  
Old 07-11-2006 | 05:11 PM
  #22  
Bit_Rusty's Avatar
Tech Fanatic
 
Joined: Dec 2005
Posts: 765
From: Adelaide, South Australia
Default

Originally Posted by M.J
has anyone tried a sphere competition how are they for offroad i heard a rumour that they work better in offroad than a GTB.

Opinions?
I use the Nosram matrix evolution system which is a re-badged LRP sphere competition... therefore all the comments in my inital post from above will apply.

No little fan for a moron like me to jam his thumb into - i think one is available but im finding temps to be very low anyway.
Bit_Rusty is offline  
Old 07-11-2006 | 07:58 PM
  #23  
tony2's Avatar
Tech Master
iTrader: (1)
 
Joined: Jan 2005
Posts: 1,510
From: Newcastle, Australia
Default

au nightmare- a good driver should be able to tell the difference between a slipper slipping and doing it job and a motors power curve, when a slipper is properly set you shouldnt really even feel it slip.
tony2 is offline  
Old 07-12-2006 | 03:55 AM
  #24  
president's Avatar
Tech Regular
 
Joined: Mar 2006
Posts: 294
From: sydney
Default

i have been running the gtb 6.5 since the castle hill pro am,and others in the club running the same system for longer,we have not had a problem,we have them in mf2's and t4's
president is offline  
Old 07-12-2006 | 04:19 AM
  #25  
PerformanceRC's Avatar
Tech Regular
 
Joined: Apr 2006
Posts: 493
Default

Anyone know about the quark65A Roadster and Cool Dash 4t motor?
Attached Thumbnails Which Brushless System?-ac15102bl_b.jpg  
PerformanceRC is offline  
Old 07-12-2006 | 04:37 AM
  #26  
Tech Master
 
Joined: Jan 2003
Posts: 1,296
From: NSW Australia
Default

I did look at the QUARK's but features & price put the Mamba Max well in front for me.
au_Nightmare is offline  
Old 08-24-2006 | 09:20 PM
  #27  
black-knight's Avatar
Tech Champion
 
Joined: Sep 2001
Posts: 6,074
From: Out to lunch
Default

For those interested the Novak 3.5r systems and individual motors have arrived locally, HEI have plenty of stock hitting the shops already, at least two will be on track at SORMCC this weekend. Will be interesting to see how they go.

Improved braking ability, thermal resistance and efficiency is the word from Novak.
black-knight is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.