Tamiya TA05 Touring Sedan
#4441
Originally Posted by Jam-ehz
It's the same as the standard suspension, 49.7mm.. #9808010
Hub Bearings for the LWS are 5x9mm.
Hub Bearings for the LWS are 5x9mm.
Last edited by GCT69; 06-27-2006 at 02:52 PM.
#4442
Tech Master
iTrader: (10)
I just wanted to say thanks to all the guys on this thread for their help with TA05 setup tips. I was able to finish 5th in the tcs here in fremont (second race day with it). The car really is something great, I was at 1580 grams and I couldn't even tell. And if anybody is wondering..the F430 body does handle really well,just use the included wing. ---AL
ps.. The should call it TA05 Champion Series..That's all you see in GT-2 and GT-3
ps.. The should call it TA05 Champion Series..That's all you see in GT-2 and GT-3
#4443
Originally Posted by MK_Arbiter
What is the best gearing for silver can motors?
#4445
Tech Adept
TA05 Blue Spur Gear Adapter.
New Tamiya TA05 Spur Gear Adapter in BLUE!!!
It is original Tamiya part, #3455985. You can find this part number at
Tamiya USA website.
It's the same as original ones, only colour different.
Email to [email protected] if you are interested.
#4446
Tech Master
iTrader: (19)
Originally Posted by big al
I just wanted to say thanks to all the guys on this thread for their help with TA05 setup tips. I was able to finish 5th in the tcs here in fremont (second race day with it). The car really is something great, I was at 1580 grams and I couldn't even tell. And if anybody is wondering..the F430 body does handle really well,just use the included wing. ---AL
ps.. The should call it TA05 Champion Series..That's all you see in GT-2 and GT-3
ps.. The should call it TA05 Champion Series..That's all you see in GT-2 and GT-3
#4447
Tech Addict
iTrader: (6)
Originally Posted by GCT69
I tried the outer shaft seems big.
This is the kit you need, 2.6mm instead of the regular 3.0mm shafts..
#53825 TB Evolution IV 2.6 Stainless Suspension Shaft Set
These are much better than those screw-pins, they just weaken the plastic joints with extra grooves
#4449
Anyone seen this yet: http://tamiya.com/japan/products/633...uide/index.htm
I wish it wasn't in Japanese though
I wish it wasn't in Japanese though
#4450
Forgot the translated page: http://translate.google.com/translat...language_tools
I think I am really interested in the aerodynamic efficiency section. I am interested in that new Lexus bodyset.
I think I am really interested in the aerodynamic efficiency section. I am interested in that new Lexus bodyset.
#4451
Tech Addict
iTrader: (4)
Originally Posted by CarKing
Forgot the translated page: http://translate.google.com/translat...language_tools
I think I am really interested in the aerodynamic efficiency section. I am interested in that new Lexus bodyset.
I think I am really interested in the aerodynamic efficiency section. I am interested in that new Lexus bodyset.
#4452
Tech Addict
iTrader: (6)
Originally Posted by TimXLB
Jam-ehz:
Hi,
Thanks for your answers to my questions. I'm not sure what the kit block are as I got my TA-05 used. but I have A blocks in the front. both front and rear inner mounts and A and C in the rear for inner mounts.
Thanks
Hi,
Thanks for your answers to my questions. I'm not sure what the kit block are as I got my TA-05 used. but I have A blocks in the front. both front and rear inner mounts and A and C in the rear for inner mounts.
Thanks
#4453
Tech Addict
Forgot the translated page: http://translate.google.com/transla...Flanguage_tools
I think I am really interested in the aerodynamic efficiency section. I am interested in that new Lexus bodyset.
I think I am really interested in the aerodynamic efficiency section. I am interested in that new Lexus bodyset.