1LikesSirio engines thread
05-12-2006 | 12:35 AM
#1246
Tech Elite
Joined: Aug 2001
Posts: 2,121
From: Madrid (Spain)
Originally Posted by litespeed-dom
Good news! My EVO3 STI IFMAR and EVO3 pipe set should be here in a few days! Along with a crank for my regular EVO3 from last year. After running Novarossi in the last month, I truly miss running my Sirio!
No matter if the conrod looks good after the break-in, change it for another (has STi conrods for replacement).
05-12-2006 | 12:55 AM
#1247
Originally Posted by Corse-R
Don't rush on the break-in, take your time, give time to the engine just to break-in itself and he will pay you with great performance.
No matter if the conrod looks good after the break-in, change it for another (has STi conrods for replacement).
No matter if the conrod looks good after the break-in, change it for another (has STi conrods for replacement).
Dom
05-12-2006 | 01:25 AM
#1248
Tech Elite
Joined: Aug 2001
Posts: 2,121
From: Madrid (Spain)
Originally Posted by litespeed-dom
What's your advice on break-in?
4 Tanks fourstroking on the starter box at full throttle, body installed, just to get a little more heat that expanded the sleeve.
6 - 10 tanks on very fat carburation, almost unable to shift into second gear, watching the temperatures. Let it rest for 5 minutes on each tank just to cool it of with the piston on the BDC. Temps should be between 90 and 105ºC.
After this I've started to lean it in small increments, watched the temperature each time. The temp where mine unit performs at it's best is around 125 - 130ºC each unit could be different, but your's will be around that temp. Seen others that go up to 145ºC without a problem.
The break-in will be finished when you notice that idle sounds 'different' and more stable (you will hear it and you will know it is finished). Heard by there that for break-in that engines almost a gallon will be used (it's true - I've used almost 3.5 litres for that small s*cker).
05-12-2006 | 05:16 AM
#1249
Tech Master
Joined: Feb 2004
Posts: 1,168
From: So. Florida
Originally Posted by litespeed-dom
Good news! My EVO3 STI IFMAR and EVO3 pipe set should be here in a few days! Along with a crank for my regular EVO3 from last year. After running Novarossi in the last month, I truly miss running my Sirio!
Dom
Dom
05-13-2006 | 11:35 PM
#1254
Tech Master
Joined: Feb 2004
Posts: 1,298
From: Los Angeles
Hello everyone, I would like to let everyone know that we now have Sirio product in stock at Kyosho America. Below will be a list of parts/engines that have arrved. Give your local Kyosho dealer a call, and they should be able to order parts/engines for you.
Code:
S12T3ISTI SIRIO 2, 1 cc EVO 3 3 PORTS SLIDE CARB. ABC SG SHAFT "IFMAR" S23RE SIRIO ENGINE 9 PORTS SLIDE CARB. ABC TX SHAFT - REVO S23RE SIRIO ENGINE 9 PORTS SLIDE CARB. ABC TX SHAFT - REVO S30RS SIRIO ENGINE BIG BLOCK* ABC 3 PORTS************* "ROTO START" S12161010 S12 STD ROTARY CARBURETTOR S12161040 S12 DOUBLE ADJUSTMENT SLIDING CARBURETTOR S21161020 S21 DOUBLE ADJUSTMENT CARBURETTOR ø 10 S21161050 S21 DOUBLE ADJUSTMENT CARBURETTOR ø 10 BUGGY S23161040 S23 STD CARBURETTOR ø 9 CASTED S21160002 CARBURETTOR THROTTLE CARB. Ø10 S21160003 BASE SPEED NEEDLE CARB ø10 S21160103 BASE SPEED NEEDLE CARB ø10 BUGGY S21160004 FULL SPEED NEEDLE S21160005 INTAKE FUEL SET S21160006 BASE SPEED ADJUSTING SET CARB. Ø10 S21160008 UNIBALL BALL JOINT S21160009 ALUMINIUM RINGS FOR INTAKE FUEL SET S21160010 O-RING CARBURETTOR SET S21160011 DUST PROTECTION RUBBER S21160012 REDUCER ø7 S21160013 REDUCER ø7,5 S21160014 REDUCER ø8 S21160015 REDUCER ø8,5 S21160016 REDUCER ø9 S23160101 S23 CARBURETTOR BODY SINGLE ADJUSTMENT S23160002 CARBURETTOR THROTTLE S23160003 BASE SPEED NEEDLE S23160004 FULL SPEED NEEDLE S23160005 INTAKE FUEL SET S23160007 BASE SPEED ADJUSTING SCREW S23160008 S23 UNIBALL BALL JOINT S23160010 O-RING CARBURETTOR SET S23160011 DUST PROTECTION RUBBER S12160017 CARBURETTOR THROTTLE S12160018 BASE SPEED NEEDLE S12160004 FULL SPEED NEEDLE S12160005 INTAKE FUEL SET S12160006 BASE SPEED ADJUSTING SET S12160013 BASE SPEED ADJUSTING SCREW S12160021 UNIBALL BALL JOINT S12160009 ALUMINIUM RINGS FOR INTAKE FUEL SET S12160010 O-RING CARBURETTOR SET S12160011 DUST PROTECTION RUBBER S12160015 REDUCER ø5 S12160016 REDUCER ø5,5 S12160014 REDUCER ø6 S12160002 CARBURETTOR THROTTLE S12160003 BASE SPEED NEEDLE S12160004 FULL SPEED NEEDLE S12160005 INTAKE FUEL SET S12160006 BASE SPEED ADJUSTING SET S12160007 BASE SPEED ADJUSTING SCREW S12160009 ALUMINIUM RINGS FOR INTAKE FUEL SET S12160210 O-RING CARBURETTOR SET S12160022 DUST PROTECTION RUBBER S12160020 RETURN SPRING S12200013 FLANGED EXHAUST "EVO3" S12200008 FLANGED EXHAUST-SILENCER KIT "EVO3" S12060100 EXHAUST SPRING S12060101 SILENCER SPRING S12170001 SHAPED EXHAUST GASKET S12170003 TEFLON SPACER S12 "SHORT" S12170004 TEFLON SPACER S12 "LONG" S12170005 EXHAUST SILICON RING S21200001 STD BUGGY EXHAUST S21200102 FLANGED BUGGY EXHAUST "LONG" "EVO 3" S21200120 EXAUST KIT 3 CHAMBERS BUGGY PRO "EVO 3"*********************** S21200121 EXAUST KIT 3 CHAMBERS RACING PRO "EVO 3"* CONICAL EXHAUST********************* S21170001 SHAPED EXHAUST SILICON S21170004 SHAPED EXHAUST GASKET LONG S21170005 EXHAUST SILICON RING S21060100 EXHAUST SPRING S21060101 SILENCER SPRING S21060102 SILENCER SPRING "LONG" S23200001 S23 STD TX MANIFOLD S23200002 S23 STD REVO MANIFOLD S23200003 S23 TUNED REVO MANIFOLD S23200008 S23 TUNED REVO SILENCER*************************************** S23200009 S23 TUNED REVO SILENCER KIT S23300002 S23 T-MAXX ENGINE MOUNT S23300001 S23 REVO ENGINE MOUNT S001720115 TURBO BUGGY GLOW PLUG S5 S001720116 TURBO BUGGY GLOW PLUG S6* S001720117 TURBO BUGGY GLOW PLUG S7* S001720126 "TURBO" GLOW PLUG S6* S001720127 "TURBO" GLOW PLUG S7* S001720128 "TURBO" GLOW PLUG S8* S12021211 "TURBO" PLUG UNDERHEAD S12030010 GASKET KIT S12041227 S12 EVO 3 5 PORTS "ABC"* PISTON AND LINER S12051032 S12 EVO 3 PISTON PIN S12060012 PISTON PIN RETAINER S12070022 S12 EVO 3 CONROD S12081302 S12 EVO 3 I SG CRANCKSHAFT "RACING" S12090021 FRONT BALL BEARING S12090231 REAR BALL BEARING "RACING" S12100010 CONE STD S12111111 S12 EVO 3 RACING CRANKCASE S12121102 BACK PLATE S12130010 O-RING KIT S12140021 HEAD SCREWS S12140022 BACK PLATE SCREWS S12140123 CARBURETTOR RETAINER S12012300 S12 MT HEAD S12021200 STD PLUG UNDERHEAD S12041211 S12 3 PORTS "ABC"* PISTON AND LINER S12051020 PISTON PIN S12060010 PISTON PIN RETAINER S12081100 S12 SG CRANKSHAFT S12081201 S12 THREADED CRANKSHAFT "RACING" S12090010 FRONT BALL BEARING S12090230 REAR BALL BEARING S12111103 S12 SE CRANKCASE S12121100 SE BACK PLATE S12130011 O-RING KIT S12140025 SE HEAD SCREWS M3 x 14 S12140024 CARBURETTOR RETAINER S18021200 S18 STD PLUG UNDERHEAD S18030010 S18 GASKET KIT S18041221 S18 5 PORTS "ABC"* PISTON AND LINER S18051020 S18 PISTON PIN S18070020 S18 CONROAD S18130010 S18 O-RING KIT S18150002 S18 PULL START ONE WAY BEARING S21021200 S21 "TURBO" PLUG UNDERHEAD S21030010 S21 GASKET KIT S21050012 S21 "PRO" PISTON PIN S21060000 S21 PISTON PIN RETAINER S21070010 S21 "RACING" CONROAD S21081300 S21 PRO CRANKSHAFT S21090010 S21 FRONT BALL BEARING S21090220 S21 REAR "RACING" BALL BEARING S21100010 S21 CONE S21113202 S21 P EVO 2 CRANKCASE S21121101 *S21 "RACING" BACK PLATE S21130000 S21 O-RING KIT S21140011 S21 HEAD SCREWS S21140012 S21 BACK PLATE SCREWS S21140013 S21 CARBURETTOR RETAINER S21011201 S21 "WCR" RACING HEAD S21021201 S21 "TURBO" PLUG UNDERHEAD S21030011 S21 GASKET KIT S21041233 S21 7 PORTS "AAC" INTEGRAL PISTON AND LINER S21050010 S21 "RACING" PISTON PIN S21081301 S21 "WCR" CRANKSHAFT S21111201 S21 "WCR" "RACING" CRANKCASE S21140021 S21 HEAD SCREWS AND WASHERS S21140024 S21 SLEEVE SCREWS S21013203 BX RACING HEAD S21013202 BK EVO2 RACING HEAD S21023100 STD PLUG UNDERHEAD S21023200 "TURBO" PLUG UNDERHEAD S21043224 5+2 PORTS BK EVO2 "ABC" PISTON AND LINER S21050010 "RACING" PISTON PIN S21083110 STD BUGGY CRANKSHAFT S21113200 S21 "RACING" CRANKCASE S21123100 S21 BACK PLATE S23012202 S23* HEAD S23021200 S23 "STD" PLUG UNDERHEAD S23021201 S23 "TURBO" PLUG UNDERHEAD S23030010 S23 GASKET KIT S23041221 S23 9 PORTS "ABC"* PISTON AND LINER S23051020 S23 PISTON PIN S23060010 S23 PISTON PIN RETAINER S23070020 S23 CONROD S23081200 S23 "TX" CRANKSHAFT S23090010 S23 FRONT BALL BEARING S23090230 S23 REAR BALL BEARING "RACING" S23100010 STD CONE S23082000 S23 BACKPLATE SHAFT S23121101 S23 TX BACKPLATE S23130010 S23 O-RING KIT S23140021 S23 HEAD SCREWS S23140022 S23 BACK PLATE SCREWS S23140023 S23 CARBURATOR RETAINER S27013200 "RACING" HEAD S27023100 STD PLUG UNDERHEAD S27023200 "TURBO" PLUG UNDERHEAD S27030010 GASKET KIT S27050011 STD PISTON PIN S27060000 PISTON PIN RETAINER S27070010 "STD" CONROAD S27083110 STD CRANKSHAFT S27083210 "RACING" CRANKSHAFT S27083310 PRO CRANKSHAFT S27090011 FRONT BALL BEARING S27090120 REAR BALL BEARING S27100010 CONE S27113100 S27 CRANKCASE S27123100 S27 BACK PLATE S27130000 O-RING KIT S27140011 HEAD SCREWS S27140012 BACK PLATE SCREWS S27140013 CARBURETTOR RETAINER S27150003 PULL START KIT S27150004 PULL START ONE WAY BEARING S27084001 PULL START REAR SHAFT S27123102 PULL START BACK PLATE S27151000 UPGRADED PUL LSTART KIT S30023100 STD PLUG UNDERHEAD S30023200 "TURBO" PLUG UNDERHEAD S30030010 GASKET KIT S30043121 3 PORTS ECO PISTON AND LINER S30050011 STD PISTON PIN S30060000 PISTON PIN RETAINER S30070010 "STD" CONROAD S30083110 STD CRANKSHAFT S30090011 FRONT BALL BEARING S30090120 REAR BALL BEARING S30100010 CONE S30113100 S30 CRANKCASE S30130000 O-RING KIT S30140011 HEAD SCREWS S30140012 BACK PLATE SCREWS S30140013 CARBURETTOR RETAINER S30140014 ROTO START SCREWS
whts sup
05-14-2006 | 02:34 AM
#1256
Originally Posted by Tim Johnson
Hello everyone, I would like to let everyone know that we now have Sirio product in stock at Kyosho America. Below will be a list of parts/engines that have arrved. Give your local Kyosho dealer a call, and they should be able to order parts/engines for you.
Code:
S12T3ISTI SIRIO 2, 1 cc EVO 3 3 PORTS SLIDE CARB. ABC SG SHAFT "IFMAR" S23RE SIRIO ENGINE 9 PORTS SLIDE CARB. ABC TX SHAFT - REVO S23RE SIRIO ENGINE 9 PORTS SLIDE CARB. ABC TX SHAFT - REVO S30RS SIRIO ENGINE BIG BLOCK* ABC 3 PORTS************* "ROTO START" S12161010 S12 STD ROTARY CARBURETTOR S12161040 S12 DOUBLE ADJUSTMENT SLIDING CARBURETTOR S21161020 S21 DOUBLE ADJUSTMENT CARBURETTOR ø 10 S21161050 S21 DOUBLE ADJUSTMENT CARBURETTOR ø 10 BUGGY S23161040 S23 STD CARBURETTOR ø 9 CASTED S21160002 CARBURETTOR THROTTLE CARB. Ø10 S21160003 BASE SPEED NEEDLE CARB ø10 S21160103 BASE SPEED NEEDLE CARB ø10 BUGGY S21160004 FULL SPEED NEEDLE S21160005 INTAKE FUEL SET S21160006 BASE SPEED ADJUSTING SET CARB. Ø10 S21160008 UNIBALL BALL JOINT S21160009 ALUMINIUM RINGS FOR INTAKE FUEL SET S21160010 O-RING CARBURETTOR SET S21160011 DUST PROTECTION RUBBER S21160012 REDUCER ø7 S21160013 REDUCER ø7,5 S21160014 REDUCER ø8 S21160015 REDUCER ø8,5 S21160016 REDUCER ø9 S23160101 S23 CARBURETTOR BODY SINGLE ADJUSTMENT S23160002 CARBURETTOR THROTTLE S23160003 BASE SPEED NEEDLE S23160004 FULL SPEED NEEDLE S23160005 INTAKE FUEL SET S23160007 BASE SPEED ADJUSTING SCREW S23160008 S23 UNIBALL BALL JOINT S23160010 O-RING CARBURETTOR SET S23160011 DUST PROTECTION RUBBER S12160017 CARBURETTOR THROTTLE S12160018 BASE SPEED NEEDLE S12160004 FULL SPEED NEEDLE S12160005 INTAKE FUEL SET S12160006 BASE SPEED ADJUSTING SET S12160013 BASE SPEED ADJUSTING SCREW S12160021 UNIBALL BALL JOINT S12160009 ALUMINIUM RINGS FOR INTAKE FUEL SET S12160010 O-RING CARBURETTOR SET S12160011 DUST PROTECTION RUBBER S12160015 REDUCER ø5 S12160016 REDUCER ø5,5 S12160014 REDUCER ø6 S12160002 CARBURETTOR THROTTLE S12160003 BASE SPEED NEEDLE S12160004 FULL SPEED NEEDLE S12160005 INTAKE FUEL SET S12160006 BASE SPEED ADJUSTING SET S12160007 BASE SPEED ADJUSTING SCREW S12160009 ALUMINIUM RINGS FOR INTAKE FUEL SET S12160210 O-RING CARBURETTOR SET S12160022 DUST PROTECTION RUBBER S12160020 RETURN SPRING S12200013 FLANGED EXHAUST "EVO3" S12200008 FLANGED EXHAUST-SILENCER KIT "EVO3" S12060100 EXHAUST SPRING S12060101 SILENCER SPRING S12170001 SHAPED EXHAUST GASKET S12170003 TEFLON SPACER S12 "SHORT" S12170004 TEFLON SPACER S12 "LONG" S12170005 EXHAUST SILICON RING S21200001 STD BUGGY EXHAUST S21200102 FLANGED BUGGY EXHAUST "LONG" "EVO 3" S21200120 EXAUST KIT 3 CHAMBERS BUGGY PRO "EVO 3"*********************** S21200121 EXAUST KIT 3 CHAMBERS RACING PRO "EVO 3"* CONICAL EXHAUST********************* S21170001 SHAPED EXHAUST SILICON S21170004 SHAPED EXHAUST GASKET LONG S21170005 EXHAUST SILICON RING S21060100 EXHAUST SPRING S21060101 SILENCER SPRING S21060102 SILENCER SPRING "LONG" S23200001 S23 STD TX MANIFOLD S23200002 S23 STD REVO MANIFOLD S23200003 S23 TUNED REVO MANIFOLD S23200008 S23 TUNED REVO SILENCER*************************************** S23200009 S23 TUNED REVO SILENCER KIT S23300002 S23 T-MAXX ENGINE MOUNT S23300001 S23 REVO ENGINE MOUNT S001720115 TURBO BUGGY GLOW PLUG S5 S001720116 TURBO BUGGY GLOW PLUG S6* S001720117 TURBO BUGGY GLOW PLUG S7* S001720126 "TURBO" GLOW PLUG S6* S001720127 "TURBO" GLOW PLUG S7* S001720128 "TURBO" GLOW PLUG S8* S12021211 "TURBO" PLUG UNDERHEAD S12030010 GASKET KIT S12041227 S12 EVO 3 5 PORTS "ABC"* PISTON AND LINER S12051032 S12 EVO 3 PISTON PIN S12060012 PISTON PIN RETAINER S12070022 S12 EVO 3 CONROD S12081302 S12 EVO 3 I SG CRANCKSHAFT "RACING" S12090021 FRONT BALL BEARING S12090231 REAR BALL BEARING "RACING" S12100010 CONE STD S12111111 S12 EVO 3 RACING CRANKCASE S12121102 BACK PLATE S12130010 O-RING KIT S12140021 HEAD SCREWS S12140022 BACK PLATE SCREWS S12140123 CARBURETTOR RETAINER S12012300 S12 MT HEAD S12021200 STD PLUG UNDERHEAD S12041211 S12 3 PORTS "ABC"* PISTON AND LINER S12051020 PISTON PIN S12060010 PISTON PIN RETAINER S12081100 S12 SG CRANKSHAFT S12081201 S12 THREADED CRANKSHAFT "RACING" S12090010 FRONT BALL BEARING S12090230 REAR BALL BEARING S12111103 S12 SE CRANKCASE S12121100 SE BACK PLATE S12130011 O-RING KIT S12140025 SE HEAD SCREWS M3 x 14 S12140024 CARBURETTOR RETAINER S18021200 S18 STD PLUG UNDERHEAD S18030010 S18 GASKET KIT S18041221 S18 5 PORTS "ABC"* PISTON AND LINER S18051020 S18 PISTON PIN S18070020 S18 CONROAD S18130010 S18 O-RING KIT S18150002 S18 PULL START ONE WAY BEARING S21021200 S21 "TURBO" PLUG UNDERHEAD S21030010 S21 GASKET KIT S21050012 S21 "PRO" PISTON PIN S21060000 S21 PISTON PIN RETAINER S21070010 S21 "RACING" CONROAD S21081300 S21 PRO CRANKSHAFT S21090010 S21 FRONT BALL BEARING S21090220 S21 REAR "RACING" BALL BEARING S21100010 S21 CONE S21113202 S21 P EVO 2 CRANKCASE S21121101 *S21 "RACING" BACK PLATE S21130000 S21 O-RING KIT S21140011 S21 HEAD SCREWS S21140012 S21 BACK PLATE SCREWS S21140013 S21 CARBURETTOR RETAINER S21011201 S21 "WCR" RACING HEAD S21021201 S21 "TURBO" PLUG UNDERHEAD S21030011 S21 GASKET KIT S21041233 S21 7 PORTS "AAC" INTEGRAL PISTON AND LINER S21050010 S21 "RACING" PISTON PIN S21081301 S21 "WCR" CRANKSHAFT S21111201 S21 "WCR" "RACING" CRANKCASE S21140021 S21 HEAD SCREWS AND WASHERS S21140024 S21 SLEEVE SCREWS S21013203 BX RACING HEAD S21013202 BK EVO2 RACING HEAD S21023100 STD PLUG UNDERHEAD S21023200 "TURBO" PLUG UNDERHEAD S21043224 5+2 PORTS BK EVO2 "ABC" PISTON AND LINER S21050010 "RACING" PISTON PIN S21083110 STD BUGGY CRANKSHAFT S21113200 S21 "RACING" CRANKCASE S21123100 S21 BACK PLATE S23012202 S23* HEAD S23021200 S23 "STD" PLUG UNDERHEAD S23021201 S23 "TURBO" PLUG UNDERHEAD S23030010 S23 GASKET KIT S23041221 S23 9 PORTS "ABC"* PISTON AND LINER S23051020 S23 PISTON PIN S23060010 S23 PISTON PIN RETAINER S23070020 S23 CONROD S23081200 S23 "TX" CRANKSHAFT S23090010 S23 FRONT BALL BEARING S23090230 S23 REAR BALL BEARING "RACING" S23100010 STD CONE S23082000 S23 BACKPLATE SHAFT S23121101 S23 TX BACKPLATE S23130010 S23 O-RING KIT S23140021 S23 HEAD SCREWS S23140022 S23 BACK PLATE SCREWS S23140023 S23 CARBURATOR RETAINER S27013200 "RACING" HEAD S27023100 STD PLUG UNDERHEAD S27023200 "TURBO" PLUG UNDERHEAD S27030010 GASKET KIT S27050011 STD PISTON PIN S27060000 PISTON PIN RETAINER S27070010 "STD" CONROAD S27083110 STD CRANKSHAFT S27083210 "RACING" CRANKSHAFT S27083310 PRO CRANKSHAFT S27090011 FRONT BALL BEARING S27090120 REAR BALL BEARING S27100010 CONE S27113100 S27 CRANKCASE S27123100 S27 BACK PLATE S27130000 O-RING KIT S27140011 HEAD SCREWS S27140012 BACK PLATE SCREWS S27140013 CARBURETTOR RETAINER S27150003 PULL START KIT S27150004 PULL START ONE WAY BEARING S27084001 PULL START REAR SHAFT S27123102 PULL START BACK PLATE S27151000 UPGRADED PUL LSTART KIT S30023100 STD PLUG UNDERHEAD S30023200 "TURBO" PLUG UNDERHEAD S30030010 GASKET KIT S30043121 3 PORTS ECO PISTON AND LINER S30050011 STD PISTON PIN S30060000 PISTON PIN RETAINER S30070010 "STD" CONROAD S30083110 STD CRANKSHAFT S30090011 FRONT BALL BEARING S30090120 REAR BALL BEARING S30100010 CONE S30113100 S30 CRANKCASE S30130000 O-RING KIT S30140011 HEAD SCREWS S30140012 BACK PLATE SCREWS S30140013 CARBURETTOR RETAINER S30140014 ROTO START SCREWS
