Go Back  R/C Tech Forums > International Forums > Australian Racing
Nosram setup procedure >

Nosram setup procedure

Community
Wiki Posts
Search

Nosram setup procedure

Thread Tools
 
Search this Thread
 
Old 01-19-2006 | 02:06 PM
  #1  
Thread Starter
Tech Adept
iTrader: (1)
 
Joined: Nov 2004
Posts: 204
From: melbourne
Default Nosram setup procedure

Hey,
some one out there has to have a nosram ESC could you post the radio setup procedure, the one for the patriot reverse is what i want or even any other nosram as they should all be the same
Cheers
merc-blue is offline  
Old 01-19-2006 | 04:04 PM
  #2  
Kyosho3PKRacer's Avatar
Tech Adept
 
Joined: Oct 2005
Posts: 167
From: Campbelltown,Australia
Default

Switch transmitter on >> Set transmiter throttle to neutral >> Connect

speed control to battery and switch speed control on >> Hold setup button

in for 3 seconds >> LED now flashes red/green to confirm it is in setup mode

>> Leavethrottle stick at neutral and press the setup button >> The neutral

setting is now stored, LED flashes green >> Move throttle to full and press

setup button while still holding full throttle >> Full throttle is now stored, LED

flashes red >> Move throttle to full brake and press setup button while still

holding full brake >> The brake is now stored, LED goes out.


I hope that is easy enough to read for you,goodluck
Kyosho3PKRacer is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.