Glad to hear it Carlos!

Hi Jason,

any chance of getting a set shipped to the UK for Saturday 17th Sept so I can run my small rears?

save me having to go back to using the CEFX to run the foams down

Does anyone know who sells Wolf springs on the Internet?

Fuzzy, which springs are you looking for and what color?

Kraig
KT Hobbies

http://www.lefthander-rc.com/catalog/index.php

should have anything pan car related you might need

do you run my 1/12th chassis kit?the pods are a mounted a little different than the stock ones.they are made specificly for my conversion kit.let me know and i will check on shipping for you.pods are in stock.

do u guys know the crc spring rates? side springs/damper? or soft to hard by colors would be appreciated. i cant beleive its not included in the packaging.

soft - hard

orange, blue, white, red, green, purple

thanks!

is have a pair of browns. any idea? what about the damper springs?

CRC Durashock/VCS springs
soft - hard

greenish gray, shiny silver, blue, gold, red, copper, .050 Stiff silver, .055 Super stiff silver.

i'm brand new to 1/12, and recently got a CRC bloody knife 3.1. it's got an 86t 64 pitch gear on it. i'm not really sure what pinion to use. i've heard different answers from 3/1 to 5/1. i'm running a low grip carpet track (not ozite). pretty large track, usually with one long straightaway that spand about 60-70 ft. any help would be appreciated.

thanks,
matt

First of all, are you running stock or modified? Gearing for 1/12th is determined by gear ratio and tire diameter, called rollout. Rollout for modified (depending on wind) is about 35mm; for stock about 40. Change to a 96 or 100 tooth spur, that is the norm.

sry i forgot to add that i run stock motors

Rollout for Monster Stock about 40mm, Roar Stock about 42, depending on the track.

Kraig - I'm looking for a pair of Wolfe orange springs for the damper disks on a 12L4. Do you have any in stock?