292LikesGT12 Racing
02-10-2024 | 02:15 PM
#631
What in the name of bad quality is going on here? Eight sets at the hobby shop tonight and all of the fronts have this.
I contacted Scott Jakes and he said this is normal, from the injection mold, and has been in every tire for two years. So clearly I am being too fussy about wanting better quality for my $35. I don’t remember these divots being that pronounced in any previous sets I have purchased. The set I returned to the hobby shop were much deeper than this set. Thoughts?
I contacted Scott Jakes and he said this is normal, from the injection mold, and has been in every tire for two years. So clearly I am being too fussy about wanting better quality for my $35. I don’t remember these divots being that pronounced in any previous sets I have purchased. The set I returned to the hobby shop were much deeper than this set. Thoughts?
02-10-2024 | 02:16 PM
#632
Then this is the wrong thread. This here is the foam tire thread. Note the missing "RT" for Rubber Tire in the thread title.
https://www.rctech.net/forum/electri...3-gt12-rt.html
https://www.rctech.net/forum/electri...3-gt12-rt.html
02-10-2024 | 02:26 PM
#633
Tech Master
iTrader: (1)
Joined: Jun 2007
Posts: 1,627
What in the name of bad quality is going on here? Eight sets at the hobby shop tonight and all of the fronts have this.
I contacted Scott Jakes and he said this is normal, from the injection mold, and has been in every tire for two years. So clearly I am being too fussy about wanting better quality for my $35. I don’t remember these divots being that pronounced in any previous sets I have purchased. The set I returned to the hobby shop were much deeper than this set. Thoughts?
I contacted Scott Jakes and he said this is normal, from the injection mold, and has been in every tire for two years. So clearly I am being too fussy about wanting better quality for my $35. I don’t remember these divots being that pronounced in any previous sets I have purchased. The set I returned to the hobby shop were much deeper than this set. Thoughts?
02-10-2024 | 04:07 PM
#635
02-11-2024 | 06:15 AM
#637
Then this is the wrong thread. This here is the foam tire thread. Note the missing "RT" for Rubber Tire in the thread title.
https://www.rctech.net/forum/electri...3-gt12-rt.html
https://www.rctech.net/forum/electri...3-gt12-rt.html
03-18-2024 | 07:40 AM
#638
What is the current best GT12 asphalt/tarmac body? Lots of downforce and steering I would imagine to be the ideal parameters. If not please educate me, I am a former racer returning after years wondering lost in the woods of other pursuits.
03-18-2024 | 05:23 PM
#639
Joined: Dec 2002
Posts: 5,351
From: Florida
Hi Adrian There are several bodys The 720, ARES-1, Akura, Super Rad (this body fits the awesomatix A12). Glad to see you back. Any Motor-striped tires and open gearing. What Chassis are you going to get. the new Exalt stuff is very good!!!!!
03-18-2024 | 08:51 PM
#640
11-17-2024 | 03:05 PM
#643
Spur
What spur gears are best ? I picked up a used p12 that has a 48p spur on it , 56 tooth , but I’m not finding very many spurs in 48p for pan cars , I’ve looked everywhere, I can’t even find the one on the car . So I ordered a couple from excelerate rc , but they are 66t .
Thnx.
Thnx.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
