To be clear, the kit will include the new rear springs. At the time of the picture, we only had our blue painted springs in the new length/rates.

The colors are funky on all of the pictures for some reason. Even on the Tekno site.

Tebo building his first 2.1 kit. Getting ready for the Worlds.

Has anyone tried the new front hubs? Looking for feedback and a comparison to the old hubs.

Assuming it's not cost effective to update a newer 2.0?

I always advocate for customers to buy the new kit versus upgrading a previous generation kit piece by piece. It's a little more up front cost but that's basically the only negative. A lot of parts from the 2.0 car will still work on the 2.1 and can be used as spares which are always nice to have.

Quick question regarding the wiring diagram on the 2.1. The picture shows steering servo on channel 2?! Shouldn't it be on channel 1? I always thought "1 to turn, 2 to burn"?

I prefer "One to steer, two to clear."

But seriously, I think you're examining the wiring diagram a little too closely. It was only meant to show how to route the wires through the car/tray and into the rx box, not show where each plug should go into the rx. For example, the battery wire is going directly into the rx also, whereas in real life you'd want to have it go through the switch first and then into the rx.

The new buggy is great out of the box. Grip tremendously improves with every tank as the buggy wears in over an hour. After that first hour is over the buggy really starts to shine and you can feel the improvements.

New to the Tekno 4 shoe clutch. I’m wondering which clutch shoes will work using the Tekno 4 shoe flywheel? I know of course Tekno and Losi. Thank you