Hey guys I just put a mamba monster x on my Mt410. I pulled it off my losi 8ight never had a problem. This was the first time running it on my 410. Fully charged batteries, wires secure everywhere. This problem would happen every now and then. It runs well but every now and then on a full throttle punch it acts like it's going into LVC or over temp and has no power. Then I can ease onto the throttle and have full power. Temps were kinda high but not terrible. 150-160 on the motor and about 120-130 on the esc. Any ideas I ran a spektrum 150A esc before on my truck and it ran fine. I just figured the MMX would be better than spektrum. Also no lights / beeps coming from the esc, driveline is moving smoothly not binding anywhere.

You look at the data logs? I don't suppose the voltage is sagging a bunch under full throttle?

9 out of 10 times Recalibrate the MMX. If you dont know how to Calibrate the MMZ, read your manual.