Community
Wiki Posts
Search
Like Tree396Likes

Tekno MT410

Thread Tools
 
Search this Thread
 
Old 03-31-2017 | 08:51 AM
  #676  
neospirit's Avatar
Tech Master
iTrader: (49)
 
Joined: Apr 2010
Posts: 1,361
Default

This is a quote from Tekno.

The white truck in the opening shot is the kit standard MT410. The one with the Rival body started life as an MT410 that we then put a long ET chassis and rear driveshaft on, that's it. The hex extenders are only on there because those particular tires are so tall and they come mounted on zero offset wheels and the Rival body is wider than most of the other bodies.
p.hat likes this.
neospirit is offline  
Old 03-31-2017 | 10:58 PM
  #677  
Tech Rookie
 
Joined: Mar 2017
Posts: 10
Default

Got mine out today for a first run. Very cool. I had put it together and was waiting for wheels and battery and it nearly killed me. Longest 5 days of my life:-) I got the Duratrax six packs and they are huge and my motor did seem to heat up pretty quick. It's got a Tekin RX8 gen 2 2000kv combo and 16 tooth pinion. I'll order a 15 tooth. Building the kit was cool but driving it was awesome!
TechieTed is offline  
Old 04-01-2017 | 06:00 AM
  #678  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Questions?? Super Lube DRI-FILM lubricant

Wondering if using this on the CV Driveshafts/Drive Cups would be good?

DRI-FILM Aerosol

Food grade, USDA authorized/NSF listed H-1
Non-conducting
Resists acid
Dries on contact
Not effected by oil, water or solvents

Last edited by vettehigh; 04-03-2017 at 07:12 AM.
vettehigh is offline  
Old 04-01-2017 | 10:26 AM
  #679  
Tech Adept
iTrader: (1)
 
Joined: Mar 2014
Posts: 109
From: Lisbon, Connecticut
Default

Another Tekno bashing.

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.
neospirit and werner sline like this.
WTs Pauly is offline  
Old 04-01-2017 | 01:11 PM
  #680  
neospirit's Avatar
Tech Master
iTrader: (49)
 
Joined: Apr 2010
Posts: 1,361
Default

I just ran mine first time with the Super Swampers. It was very hard to keep the front end down.
neospirit is offline  
Old 04-03-2017 | 06:44 AM
  #681  
Tech Apprentice
iTrader: (1)
 
Joined: May 2013
Posts: 97
Default

Anybody know where I can find an unpainted Rival body? I'm running my MT410 on the ET48 chassis and I'm due for a new lid. I can't find one in stock anywhere!
Tampagoalie is offline  
Old 04-04-2017 | 07:21 AM
  #682  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Talking Badlands MX43 Pro-Loc All Terrain Tires Mounted

Wonder if Pro-Line will make a smaller version of these to fit the MT410

Damn cool these are

https://www.prolineracing.com/tires/...tires-mounted/
vettehigh is offline  
Old 04-04-2017 | 08:13 AM
  #683  
neospirit's Avatar
Tech Master
iTrader: (49)
 
Joined: Apr 2010
Posts: 1,361
Default

I think they are the same as the Badlands MX38.
neospirit is offline  
Old 04-04-2017 | 08:48 AM
  #684  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Unhappy

Originally Posted by neospirit
I think they are the same as the Badlands MX38.
Your correct, just called them. The Impulse Pro-Loc Black Wheels with Stone Gray Rings will NOT be available on the 3.8's
vettehigh is offline  
Old 04-04-2017 | 09:03 AM
  #685  
neospirit's Avatar
Tech Master
iTrader: (49)
 
Joined: Apr 2010
Posts: 1,361
Default

Too bad those wheels do look nice.
neospirit is offline  
Old 04-06-2017 | 05:36 AM
  #686  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Lightbulb Cleaning your MT

I've been wanting one of these for some time but I never got around to getting one. Well, it came in yesterday and holy cow does it blow

It's just a blower!! Has tons of force too

0verkill likes this.

Last edited by vettehigh; 04-26-2017 at 10:13 AM.
vettehigh is offline  
Old 04-06-2017 | 01:56 PM
  #687  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Thumbs up Tekno weight

Just weighed my MT, it's exactly at 9lbs (excluding LiPo)
vettehigh is offline  
Old 04-06-2017 | 06:22 PM
  #688  
Tech Rookie
 
Joined: Feb 2016
Posts: 8
From: Shoreline , WA
Default

Originally Posted by vettehigh
Just weighed my MT, it's exactly at 9lbs (excluding LiPo)
That's what i call a high strength per ounce ratio ... ""\__/""
Elmuggoose11 is offline  
Old 04-07-2017 | 05:35 AM
  #689  
vettehigh's Avatar
Tech Addict
iTrader: (4)
 
Joined: Feb 2017
Posts: 686
From: Upstate, NY
Questions?? Your MT weight

Originally Posted by Elmuggoose11
That's what i call a high strength per ounce ratio ... ""\__/""
Wonder what others weigh in at..chime in
vettehigh is offline  
Old 04-07-2017 | 06:08 PM
  #690  
Tech Adept
iTrader: (1)
 
Joined: Mar 2014
Posts: 109
From: Lisbon, Connecticut
Default

Originally Posted by vettehigh
Wonder what others weigh in at..chime in
I'm at 10lbs 9.6oz. No lipos.

That's with my reinforced body, steel tower to tower brace, T- Bone bumpers, and Pro-Line Rock Rages
WTs Pauly is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.