6LikesHPI Sprint 2 Mods
SHOUT OUT!
10-18-2016 | 03:57 AM
#797
Tech Rookie
Joined: Oct 2016
Posts: 8
From: Joinville - SC
hi, i'm new in here!
After read everythings, i did some mods becouse i use in race.
In first place i put the aluminum chassis.
And after, i broke my servo and change to savox 1252 with "CASTLE CC BEC" adjusted to 6 volts to hold the servo.
And last but not least, I did something to remove the slack, that worked perfectly.
After read everythings, i did some mods becouse i use in race.
In first place i put the aluminum chassis.
And after, i broke my servo and change to savox 1252 with "CASTLE CC BEC" adjusted to 6 volts to hold the servo.
And last but not least, I did something to remove the slack, that worked perfectly.
Last edited by RKoser; 10-22-2016 at 01:01 PM.
11-12-2016 | 05:52 PM
#804
Tech Rookie
Joined: Oct 2016
Posts: 8
From: Joinville - SC
11-12-2016 | 05:57 PM
#805
Tech Rookie
Joined: Oct 2016
Posts: 8
From: Joinville - SC
Well, today I did a few tests, I removed the Crown of 90 and put another 87 teeth.
I pulled out the pinion teeth 23 and installed one of 30.
And look at the speed he reached on the track, not in a straight line for speed.
I pulled out the pinion teeth 23 and installed one of 30.
And look at the speed he reached on the track, not in a straight line for speed.
11-19-2016 | 08:20 PM
#806
Well, today I did a few tests, I removed the Crown of 90 and put another 87 teeth.
I pulled out the pinion teeth 23 and installed one of 30.
And look at the speed he reached on the track, not in a straight line for speed.
Attachment 1396235
Attachment 1396236
I pulled out the pinion teeth 23 and installed one of 30.
And look at the speed he reached on the track, not in a straight line for speed.
Attachment 1396235
Attachment 1396236
So... you went so fast that time stood still???
02-07-2017 | 05:33 AM
#809
03-07-2017 | 08:01 AM
#810
