Tamiya mini cooper
Best guess would be 50mm is shock body including cap and upper ball mount thing.
Last edited by monkeyracing; 08-12-2017 at 07:34 PM.
Tech Apprentice
Joined: Jan 2013
Posts: 52
Don't quote me on this, but I'd guess the length of the shock body might be somewhere around 50mm and the width of it 13mm. I've never fully understood this, because most mini shocks are 58-63mm long, end to end when built without internal spacers.
Best guess would be 50mm is shock body including cap and upper ball mount thing.
Best guess would be 50mm is shock body including cap and upper ball mount thing.
Because it is shorter than the shock i have before (pic on previous page)
I bought 3r m05 damper set bcause the older one(colt rc damper) is too long.. when i run it, it would be grip roll..
Now i change the new one and now its flat..

See the difference??
Both are fully extended



Tech Apprentice
Joined: Jan 2013
Posts: 52
This is 3 racing damper set for m05.. the #54000 has black aluminum body..
Sure it does looks similar.. hehehhe

I think they meant that the shock body itself is black (or much darker than silver). The end caps are blue.
Tech Apprentice
Joined: Jan 2013
Posts: 52
Tech Apprentice
Joined: Jan 2013
Posts: 52
Yeap.. like gigaplex said.. 😁😁😁 the housing is different.. the cap and the bottom are the same as tamiya.. anodized blue cap..
M-Chassis was won by Korean driver Im Man-Soon who was the class of the field, he won the first two legs of the final, lapping most of the other competitors in the process. Should be a strong contender in Tokyo in November.
Videos are here
Round 1
https://www.youtube.com/watch?v=1rOx0zRM9mc
Round 2
https://www.youtube.com/watch?v=JmRfmQz63Vo
Round 3
https://www.youtube.com/watch?v=ttfrmE0_IJY



295Likes
