2991Likes1/12 forum
04-06-2016 | 03:30 PM
I think the Tamiya rears are pretty close to a yellow (according to those that know more than me) - I've tried Jaco Pinks before but not on this surface.
04-07-2016 | 04:42 AM
Tech Apprentice
Joined: Dec 2010
Posts: 90
I'd like to know if you produce or you will produce an alu lower chassis for serpent s120 LTX. Thank you in advance.
ok the brand new X-ray chassis ready to roll only 24 made 14 left for sale post on here if wanting one.
NEW PRODUCT!
Introducing the new Aluminum Chassis for the XRAY X12 2016! Made from premium 2.5mm thick 7075-T6 aluminum so you can run your stock lower pod plate machined to perfection! Works extremely well on medium-high bite tracks. Generates more traction while at the same time making the car faster and easier to drive.
Features: Anodized Black plate milled down front arms pockets .50 so you can run smaller tires.
•Optimized cutouts for dynamic flex
•Optional holes for direct servo mount to chassis
•15g heavier than standard XRAY carbon chassis
•Lower center-of-gravity
NEW PRODUCT!
Introducing the new Aluminum Chassis for the XRAY X12 2016! Made from premium 2.5mm thick 7075-T6 aluminum so you can run your stock lower pod plate machined to perfection! Works extremely well on medium-high bite tracks. Generates more traction while at the same time making the car faster and easier to drive.
Features: Anodized Black plate milled down front arms pockets .50 so you can run smaller tires.
•Optimized cutouts for dynamic flex
•Optional holes for direct servo mount to chassis
•15g heavier than standard XRAY carbon chassis
•Lower center-of-gravity
04-07-2016 | 05:12 AM
Tech Addict
Joined: Dec 2009
Posts: 684
From: Sydney Australia
Of the 3 different brands which starts out the biggest diameter? Running outdoors I can afford to start tires bigger than on carpet
I think the Tamiya rears are pretty close to a yellow (according to those that know more than me) - I've tried Jaco Pinks before but not on this surface.
I think the Tamiya rears are pretty close to a yellow (according to those that know more than me) - I've tried Jaco Pinks before but not on this surface.
You will thank me later.
04-08-2016 | 06:04 PM
04-08-2016 | 07:53 PM
Tech Addict
Joined: Dec 2009
Posts: 684
From: Sydney Australia
Ask for Jay, The Z compound is normally a too order item as they are not cheap.
I have placed and order for the NSW titles and ULTI will be shipping them this week (i believe). They should arrive end of this week or early next week.
Trust me on low grip asphalt or painted fake asphalt nothing compares.
04-09-2016 | 07:21 PM
Call Walter RC Hobby. (02) 9632 8733
Ask for Jay, The Z compound is normally a too order item as they are not cheap.
I have placed and order for the NSW titles and ULTI will be shipping them this week (i believe). They should arrive end of this week or early next week.
Trust me on low grip asphalt or painted fake asphalt nothing compares.
Ask for Jay, The Z compound is normally a too order item as they are not cheap.
I have placed and order for the NSW titles and ULTI will be shipping them this week (i believe). They should arrive end of this week or early next week.
Trust me on low grip asphalt or painted fake asphalt nothing compares.
Thanks - I knew Walter had the other compounds but didn't know about the Z's
04-10-2016 | 04:17 PM
Ran them at the Victorian State titles over the weekend with geat results.
When the track was sugar sprayed the night before, had to glue the front JH and trued 2mm off to stop traction rolling. During the finals, ran the tyres straight out of the packet.
04-14-2016 | 03:21 AM
New VBC LightningM 1/12 car
Just saw this announcement on a new VBC pan car.
http://www.vbcracing.com/products/li...-d-05-vbc-ck18
http://www.vbcracing.com/products/li...-d-05-vbc-ck18