Chassis
TKR5016B – Gearbox (rear, angled)
TKR5049A – Pivot Balls (6.8mm, no flng, sway bar, shck ends, almnm, 4pcs) TKR5052A – Pivot Balls (6.8mm, inside camber, steering links, aluminum, 4pcs) TKR5053A – Pivot Balls (6.8mm, flanged, outside camber, aluminum, 4pcs)
TKR5058A – Pivot Balls (5.8mm, no flange, brake/steering link, aluminum, 4pcs) TKR5079A – Stabilizer Balls (6.8mm, sway bars, aluminum, 4pcs)
TKR5165 * V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT)
TKR5188 * Rod Ends (6.8mm, M4 thread, SCT/SL, 8pcs)
TKR5212 – LCG Motor Mount Insert (aluminum, gun metal ano)
TKR5260 * CNC Split Cntr Diff Mount (mtr mnt only, 7075, gun metal ano, EB/ET/SCT) TKR5263 * Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL) TKR5288 – Chassis (7075, black anodized, lightened)
TKR5491 * Sway Bar (2.4mm, rear)
TKR5515 * Suspension Arms (rear, SCT.3/SL)
TKR5516 * Suspension Arms (front, SCT.3/SL)
TKR5518B – Front Bumper Set (SCT410)
TKR5541B * Spindles (6x13x5mm outer bearing, L/R, SCT410/EB48SL)
TKR5545 * Rear Hubs (L/R, CV or uni, SCT.3/SL)
TKR5548 – Decal Sheet (SCT410.3)
TKR5554A – Spindle Bushings (SCT410, 4pcs, aluminum, hard ano)
TKR5555A – Arm Bushings (SCT410, 4pcs, aluminum, hard ano)
TKR5570B – Stub Axles (SCT410, hardened steel, 2pcs)
TKR5571M * Wheel Hexes (steel w/ set screw, lightened, 12mm, SCT410/SL) TKR5575X – Diff Coupler (SCT410, f/r, hardened steel, lightened)
TKR5579 * Tapered Driveshaft (SCT/EB48SL, center, front, 7075 aluminum, black ano) TKR5581 * Shock Tower (front, 7075, black ano, SCT.3/SL)
TKR5584 * Shock Tower (rear, 7075, black ano, SCT.3/SL)
TKR5730 * V2 Adj. Hinge Pin Brace Set (composite, EB/NB/ET/NT/SCT)
Diff
TKR5149X – Differential Cross Pins (composite, 3pcs) TKR5614X – Differential Outdrives (SCT410, f/c/r, lightened)
Shocks
TKR6140 * Locking Shock Rod End and Spring Perch Set (EB/NB/ET/NT/SCT) TKR6143 * Shock Boots (medium length, front, EB/NB/SCT, 2pcs)
TKR6144 * Shock Boots (long length, rear EB/NB/SCT, front ET/NT, 2pcs)
Hardware
TKR1215 * M5 Locknuts (aluminum, flanged, serrated, black, 4pcs) TKR1238 * Droop Adjustment Screws (M4x10mm, 8pcs)
TKR1605 * M3x10mm Set Screws (black, 10pcs)
TKR1609 * M3x3mm Set Screws (black, 10pcs)
TKRBB05134 – Ball Bearing (5x13x4, 4pcs) TKRBB06135 – Ball Bearing (6x13x5, 4pcs)



Cheers

does anyone know when these are going to start shipping, I can't wait to get my build on

I might have missed this somewhere but here goes what size are the turnbuckles for the new truck? I have heard the same and that only 4mm rods on all 6? Help please thanks

Now!!!

Pete @ fiercercsolutions.com has first shipment on the way now, tracking says they should be at his place Monday. Still 3 unclaimed, might want to get in on those 3. (Mines one of the claimed ones.)

Woo Hoo!Tekno shipped my new 410.3 today!

Got one preordered. Think I'm going to give the LRP 10L 4700 a shot and see how it hangs with the 4300HD.

Probably. Is that a problem?

Mine shipped out today also, it's going to be a busy weekend.

Curious because I ordered the same Durango aluminum turnbuckles as my first sct410 now Im wondering if the new set I ordered will fit

Already customizing ...jeezz

That LRP caught my eye as well. I'll be keeping an eye on this for your results

Ok, thoughts. I run on a small-med indoor tracks (astro & clay) And about to start the outdoor tracks when they open (hopefully soon) Here are my motor choices. Tekin Pro4 4000kv, tekin Pro4 HD 4300, & hobbywing 4700kv. I have all 3, so it's not deciding on what to buy, just what would be the better choice. I have mod1 pinions 13t-20t

I've ran the 4300HD in my last truck with 15t pinion, but have yet to try the other two.

to those of you that are running a tekin rx8 gen 2 in your tekno,would the tekin TT3811 100mm sensor cable be long enough to reach from the esc to the motor?i will be hooking it up to a hobbywing 4700kv motor,so i want to make sure it is long enough and compatible.I also ordered a hotwire for it,will there be anything else i need to make this work?This is my first tekin esc and i just wanted to know what parts,adapters i will need to make it work?

I was running 50mm, and it was "just" long enough, wish I had just a little more. 100mm should be perfect.

I already ordered ceramic bearings from boca, aluminum screw kit, aluminum turnbuckles, another m2c chassis, plus all aluminum shock components and carbon fiber parts plus some more stuff I forgot