38LikesTekno ET48 Thread
04-30-2014 | 11:28 AM
#2702
Joined: Sep 2002
Posts: 3,546
From: Northern VA
04-30-2014 | 12:06 PM
#2703
I see that the rear End arm and outer hinge pins are not marked
thanks
04-30-2014 | 07:57 PM
#2704
Joined: Sep 2002
Posts: 3,546
From: Northern VA
Marc,
Here it is:
https://drive.google.com/file/d/0B6D...it?usp=sharing
It says high bite but I've used it a multiple tracks with no issues. Others have driven it and it's glued.
I'm going to go up in the front diff or the center diff from 10k to 12k and may go up in the front sway bar as I'm looking for a little more on power steering and more high speed steering.
Hope this helps,
Mark
Here it is:
https://drive.google.com/file/d/0B6D...it?usp=sharing
It says high bite but I've used it a multiple tracks with no issues. Others have driven it and it's glued.
I'm going to go up in the front diff or the center diff from 10k to 12k and may go up in the front sway bar as I'm looking for a little more on power steering and more high speed steering.
Hope this helps,
Mark
Last edited by munrath; 05-08-2014 at 08:52 PM.
05-01-2014 | 09:24 AM
#2709
05-02-2014 | 02:24 PM
#2710
Marc,
Here it is:
https://drive.google.com/file/d/0B6D...it?usp=sharing
It says high bite but I've used it a multiple tracks with no issues. Others have driven it and it's glued.
I'm going to go up in the front diff or the center diff from 10k to 12k and may go up in the front sway bar as I'm looking for a little more on power steering and more high speed steering.
Hope this helps,
Mark
Here it is:
https://drive.google.com/file/d/0B6D...it?usp=sharing
It says high bite but I've used it a multiple tracks with no issues. Others have driven it and it's glued.
I'm going to go up in the front diff or the center diff from 10k to 12k and may go up in the front sway bar as I'm looking for a little more on power steering and more high speed steering.
Hope this helps,
Mark
will you post your newest setup after your testing?
you run Protc3 inserts front and rear or just rear?
05-03-2014 | 06:08 PM
#2712
Joined: Sep 2002
Posts: 3,546
From: Northern VA
Thanks. I was able to get in a couple hours today and headed back tomorrow. On the ET48 I started today with 15k in the center and it was just to much. I backed the center down to 10 and went to 12k in the front and it was butter. Tomorrow I'll test some camber link changes and a spring change. The ET48 is dialed. I was the only one today in the 22 second laptimes.
Mark
05-03-2014 | 06:23 PM
#2713
Tech Regular
iTrader: (7)
Joined: Apr 2007
Posts: 377
From: Chambersburg, Pa
Hey Mark if you head to any races you think will have a great turnout or something cool is happening shoot me a message. As you know I'm new to area and would like to check out places I haven't raced yet. I'm having surgery next week and will be in a wheelchair a few months so Ive got nothing to do but hit the RC heavy. Spent all day at G's today, I got a few more things I want to try(storm blew in this evening) but I got it closer yet today to being real good in the loose low traction. Definitely need to order some yellow springs.
05-03-2014 | 06:34 PM
#2714
Joined: Sep 2002
Posts: 3,546
From: Northern VA
Hey Mark if you head to any races you think will have a great turnout or something cool is happening shoot me a message. As you know I'm new to area and would like to check out places I haven't raced yet. I'm having surgery next week and will be in a wheelchair a few months so Ive got nothing to do but hit the RC heavy. Spent all day at G's today, I got a few more things I want to try(storm blew in this evening) but I got it closer yet today to being real good in the loose low traction. Definitely need to order some yellow springs.
Good luck on the surgery. I'll be headed to all of the ROAR Region 2 series races. I plan to make a trip to G-Force Hobbies in Delware, RC Pro in Hayes is a great track and great people, Debbies RC in Chesapeake, VA is pretty good. Awesome RC is great and they have a wheelchair ramp.
I'll keep you posted.
Mark
05-05-2014 | 12:58 PM
#2715
Tech Elite
Joined: Oct 2011
Posts: 2,069
What size pinion ya'll running these days on a 2000kv 4s? I've been running 17t but the fan was running last time I came off the track and the motor was about a 2 second touch before too hot. (had to marshal no time to temp) I'm thinking 16t will be better and still fast enough down the straight.