Serious Upgrade setup, help needed
03-17-2014 | 02:27 AM
#16
Thread Starter
Tech Initiate
Joined: Feb 2014
Posts: 42
You didnt mention it but have you got a charger already? And as for lipo's, Hobbyking.com sells Turnigy Nanotech's which are excellent batteries for the money. Since SMC or SPC don't sell 6S, you may want to have a look at that website.
As far as your list goes, considering what you're doing with this buggy, I would pick up at least 1 or 2 extra sets of tires, (Ofna belted street tires is something you should look at) and maybe another wing and a body.
As far as your list goes, considering what you're doing with this buggy, I would pick up at least 1 or 2 extra sets of tires, (Ofna belted street tires is something you should look at) and maybe another wing and a body.
I do have a charger its a
HYPERION EOS 0606I AC/DC 240V CHARGER
I will have a look at the SMC cause SPC are all sold out
I don't know about the SMC balancing tabs, would they be the same as SPC cause that what i've been using for the past couple of years and before that I was using MaxAmps
03-17-2014 | 04:16 PM
#18
Thread Starter
Tech Initiate
Joined: Feb 2014
Posts: 42
Which is the one I need to be able to charge and balance a SMC lipo with a
HYPERION EOS 0606I AC/DC 240V CHARGER
HP-EOSLBA-26EH-B
LBA10 /BC 2S-6S MultiAdapter JST EH, NO WIRES
or
HP-EOSLBA-26XH-B
LBA10 /BC 2S-6S MultiAdapter JST XH, NO WIRES
Thanks again
HYPERION EOS 0606I AC/DC 240V CHARGER
HP-EOSLBA-26EH-B
LBA10 /BC 2S-6S MultiAdapter JST EH, NO WIRES
or
HP-EOSLBA-26XH-B
LBA10 /BC 2S-6S MultiAdapter JST XH, NO WIRES
Thanks again
03-17-2014 | 08:15 PM
#19
03-18-2014 | 04:47 PM
#20
Thread Starter
Tech Initiate
Joined: Feb 2014
Posts: 42
Great thats what i've got (JST XH balance plug) looks like i'm buying a SMC battery, I hope there as good if not better then the SPC which i'm real happy with the only thing is that supplier here in Australia is sold out, have to wait for a week or two
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
