Jazza, Is it because you are using foam tires that is why you can reach 10 min.? or even with GT rubber tires like sweep?

Hey guys,

Some feedback from my M7T. Motor is running really strong after 2 club days and two full nationals (practice, sprints and enduros)

Only changed one plug on the engine since breakin and it was still the standard turbo plugs.

We have run similar time on the WC motor. WC is another beast all together, maybe should start a new thread for that motor, its in a league of its own.

Hi everybody,

We finally got our redesigned shop up and running :-)...

Still many products to come, we got a lot that's not yet inserted.

But at least the shop is running now.

Take a look: www.rc-netshop.dk

Sitting on about 16 -17 litres on the .21 WC XL Stroke. Thing is still pulling like when we first ran it.

Very surprised how durable these motors are, the WC Specials are arriving early next week, these are the factory run in motors, will send some pics if guys are keen to see.

Everyone is going to be a pre-run?
No extra charge? Or is that a stupid question?

Hi Joe,

We do sell them pre-run and it's from the factory. We charge 38EURO or app. 52USD for that service.

https://rc-netshop.dk

Thanks

It looks like the head for the Team version 2 R5T is larger diameter. If so, what is the diameter? Is it taller? Do you need a different lower head / combustion chamber to use it on another engine.

I'm using the 5R in a GT8 on road car and need to keep it cooler.

Thank in Advance

Pre run is an easier way to get your motor prepared from factory than running in on bench or track.

This is very helpful before a National when track time is limited.

Also having Mario run the engines in will make a difference in performance, to what degree we will see. But peace of mind on break in is always good.

Break in is around the $60 dollar mark.

Received two of them today .21 WCS.

Yes I know. You put in your post that they are the pre run version. I thought they were all pre broken in

Factory run in, it says.