SERPENT TRUGGY CONVERSION
#64
Cool Glad to have you back!
#66
Tech Master
iTrader: (5)
Joined: Nov 2003
Posts: 1,850
+1 on that setup, it's money, indoors or out. Pay attention to the notes at the bottom, the setup is using the 10 deg caster blocks and 1.0 rear V2 hubs from the buggy, which are different than what comes on the truggy. The hinge pins are closer to the axles, giving different roll centers than the stock truggy parts. Also, using the aluminum 0 deg steering blocks.
#67
http://www.youtube.com/watch?v=K0HaM2l35oM
Joe is the red and yellow truck starting second. 1st was Ryan Lutz so we didnt have much of a chance LOL. Joe did TQ the first round though!
Joe is the red and yellow truck starting second. 1st was Ryan Lutz so we didnt have much of a chance LOL. Joe did TQ the first round though!
#70
Tech Adept
iTrader: (7)
Joined: Jun 2012
Posts: 146
I just wanted to thank chicky for all of his help with my truggy conversion, he recognized my issue that I had previously posted, contacted me then set me up with replacement parts for the kit. I received the parts today and they worked great. Paul runs a top notch customer support center. Thanks again for your help.
John
John



1Likes
