well...I am sidelined until I can get the new RPM arms. I am breaking the stock ones weekly, Off light taps of the pipes. I am sure the cool temps are not helping either. I was going to do the oring mod, but meh, I will just wait 2 weeks for the new arms.

Put the avid slipper in my b44.2 and it works great!! way smoother! But needs a red pad.

Red pad in the middle is very nice. You need that Avid center brace now to finish it off.

How much did the new slipper cost ya? Looks very clean!

Do you have a part number for the arms?

Hi guys, I'm still building my B44.2 as unavailable parts from online websites start making their way to my doorstep.

I just got my Reedy 6.5 motor in today. I wanted to ask, do you guys have a recommended pinion gear setup for this fast motor? I imagine the pinion gear set that came with the kit won't suffice so before I place another online order I thought I'd ask the pro's

Thank you in advance!

http://www3.towerhobbies.com/cgi-bin...?&I=LXEBNA&P=7

http://www3.towerhobbies.com/cgi-bin...?&I=LXEBNA&P=7

Depending on the track I use a 81 spur and a 18 pinion

6.5 is a bit much for indoor tracks....
To answer your question however, I would start at 18/81.

Thank you! Yeah, this car will see mostly dirt (outdoors). I will need some road tires and off-road tires to test things out. Forgive my ignorance but do I just search for 12mm hex head wheels/tires?

http://www.amainhobbies.com/index.ph...e-Buggy-Wheels

Just the slipper wiuld be like around 40$ you have to get the slipper, the spacer, and the red slipper pads

Nah I like the blue stuff lol

Only 12mm hex rear wheels. Front wheels are different. Look for B44 specific front wheels. Many companies will list in the description if the wheels fit the B44 front. All 3 evolutions of the B44 have used the same front hex.