Community
Wiki Posts
Search

summit advice

Thread Tools
 
Search this Thread
 
Old 12-22-2013 | 06:07 PM
  #16  
Tech Elite
iTrader: (18)
 
Joined: Apr 2009
Posts: 2,049
From: Long Island, NY
Default

Originally Posted by josht21
what do I put in my ring gear
Silicone diff fluid goes inside the diff, grease lubricates the ring and pinion on the outside. I generally use synthestic automotive grease but there's Gorilla Snawt, AE, Losi and others have their own grease, take your pick.
Overdriven is offline  
Old 12-22-2013 | 06:26 PM
  #17  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

ok and what is a good set of tires of mud and a set of tires of snow
josht21 is offline  
Old 12-23-2013 | 11:25 AM
  #18  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

on my summit the rc does not move at all ar very little would bad gears in the transmission make that happen
josht21 is offline  
Old 12-23-2013 | 11:16 PM
  #19  
frontedge's Avatar
Tech Master
iTrader: (61)
 
Joined: Nov 2007
Posts: 1,005
From: Granbury, Tx
Default

I would check and make sure your slipper isn't too loose.
frontedge is offline  
Old 12-25-2013 | 05:01 AM
  #20  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

Originally Posted by frontedge
I would check and make sure your slipper isn't too loose.

Nope the slipper is fine it turns good
josht21 is offline  
Old 12-29-2013 | 09:31 AM
  #21  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

The summit does nit move when on ground but when I pick the truck up the tires do move but sounds like crap the center drive shafts turn when it sits on the ground but truck does not move can some one help me
josht21 is offline  
Old 12-29-2013 | 11:57 AM
  #22  
frontedge's Avatar
Tech Master
iTrader: (61)
 
Joined: Nov 2007
Posts: 1,005
From: Granbury, Tx
Default

Is it possibly stuck between hi and low? If not does it do this in both high and low?
frontedge is offline  
Old 12-30-2013 | 07:00 AM
  #23  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

Originally Posted by frontedge
Is it possibly stuck between hi and low? If not does it do this in both high and low?
Yes it does it in both i have reviese a little bit tho
josht21 is offline  
Old 12-30-2013 | 07:05 AM
  #24  
Tech Adept
 
Joined: Jul 2011
Posts: 144
From: Australia
Default

Can you make a video of what it's doing?
TheKennyKiller is offline  
Old 12-30-2013 | 07:08 AM
  #25  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

Originally Posted by TheKennyKiller
Can you make a video of what it's doing?
Sure give me a min
josht21 is offline  
Old 12-30-2013 | 07:20 AM
  #26  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

It is not doing it right now bit it does it on and off
josht21 is offline  
Old 12-30-2013 | 07:47 AM
  #27  
Tech Adept
 
Joined: Jul 2011
Posts: 144
From: Australia
Default

If it does it again whip the camera out, preferably with the body off so we can see what the gear selector servo is doing.
TheKennyKiller is offline  
Old 12-30-2013 | 08:01 AM
  #28  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

Ok I am guess it is the diff tho
josht21 is offline  
Old 01-04-2014 | 12:16 PM
  #29  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

I found the problem with my rc it was the diff bit thanks for all the help
What would be a good set of tires of my summit
josht21 is offline  
Old 01-05-2014 | 06:41 PM
  #30  
Thread Starter
Tech Initiate
iTrader: (1)
 
Joined: Dec 2013
Posts: 49
From: wi
Default

what is your opinion on big joe tires for my summit or are trenchers x better
josht21 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.