WOW: mga sirs, saan location to? FloridaBlanca pa rin ba? nice trail at nice weather...

XQ-S5040D,XQ-S3015M Perfect match for 1:5~1:4 large scale racing cars,used as the steering servo and brake and throttle servo separately.

XQ-S5040D Monster torque metal gear digital servo
Bearing: Dual ball bearing

Gear Type: Metal

Height: 59.7mm

Length: 60.1mm

Width: 30.1mm

Motor Type: Coreless

Servo Type: Digital

Servo Voltage: 4.8 - 7.2V (Common Voltage)

Size Category: Big scale

Speed: 0.18 sec/60 deg @ 6.0V;
0.16sec/60 deg @ 7.2V

Torque: 465 oz-in (33.5 kg-cm) @ 6.0V;
553 oz-in (39.8 kg-cm) @ 7.2V

Weight: 6.25 oz (177.5 g)


XQ-S3015M High torque metal gear analog servo
Bearing: Dual ball bearing

Gear Type: Metal

Height: 38.5mm

Length: 40.8mm

Width: 20.3mm

Motor Type: Carbon brush

Servo Type: Analog

Servo Voltage: 4.8 - 7.2V (Common Voltage)

Speed: 0.18 sec/60 deg @ 6.0V;
0.16sec/60 deg @ 7.2V

Torque: 208 oz-in (15.0 kg-cm) @ 6.0V;
222 oz-in (16.0 kg-cm) @ 7.2V

Weight: 2.11 oz (60 g)

DIY Roof Basket
DIY Tail & Fender Lights
DIY Roof Rack Fog Lights
DIY BEC w/ Huge Heat Sink
DIY Aluminum Rear Bumper Skid Plate
DIY Aluminum Side Rock Slider
DIY Copper Front Skid Plate
DIY LED Grill Blinkers (red/blue)
DIY Front/Rear Diff Locked
Aluminum Center Gear Box Protector (RC380 motor mount)
Aluminum Rear Axle Gear Box Protector (2xRC380 motor mount)
ESC Digital Thermometer
Scale Accessories
Scale PNPA Plate
Aluminum Shocks (HSP)
Walker Evans Wheels
BF Goodrich Stock Scale Tires
Decals (Maxxis, KYB, Rockstar, Glock)
Tamiya TEU-104BK ESC
Sanwa SRM102 Servo
Himoto 2ch 2.4GHz Tx/Rx
Fullymax 2s 3900mAh








more pictures here> https://www.facebook.com/photo.php?f...type=3&theater

Video of the LEDs> https://www.youtube.com/watch?v=BMN8CN5nVfY

Ganda naman ng mga rigs nyo mga sir. Ganda rin ng trail site. Pwede ba kami pumunta jan?

Great job on the DIYs keep it up! Sama mo na yan sa trail meet every sunday sa parks and wildlife!

For sale Land rover Defender D90 roof for axial dingo kit
Made of styrene plastic
Painted with matte camel yellow
Rubber windowpanes
Shovel and Axe scale accessories included
Rolled-up canvas on rear

Selling for 1,000





Please call or text 09278660119. Paul

thank you sir! looking forward. sana wala na bagyo.

karnaugh2005, Currie, xtiansy, St Paul: Great looking rigs guys! Keep it up!

Here's a "Better Late than Never Video" of our Fathers' Day 2013 Demo at Festival Mall Alabang.

+ YouTube Video

Thank you sir mix!

nice video just finished watching it.

Sharing a build.

Finally decided to build a Hilux High Lift.

I always thought that the stock set up was missing something. Tires were too small. Body to tire gap was too big.



Upsizing to CR-01 rims and tires made the gap smaller.



Pushing a bit further to Ripsaws, made it look meaner. However, if stepboards were installed, it would rub against the tires.



Decided to test a Junfac light weight chassis and lift kit. Wheel wideners were added for proportion.

Very Nice Xfire, the junfac chassis is a nice touch, cant wait to see it done.

Here's Part 2 of our Fathers Day 2013 event...

+ YouTube Video

Ang lulupit naman ng mga bagong rigs! Sana magkaroon tayo ng get together minsan. Magkakasama lahat mag trail, luzon, visayas, mindanao. Kahit once a year. stay dry and keep safe po bros. kitakits

Thanks Mix.

Thinking of using an RC4WD Yota bodyshell as well.

Hey guys help is coming

Very nice scale.