Placement of receiver capacitor?
04-27-2013 | 05:31 PM
#1
Thread Starter
Tech Regular
Joined: Mar 2013
Posts: 262
From: DFW, Texas
Placement of receiver capacitor?
I have a Novak Glitch Buster Receiver Capacitor, I need to connect to my Spectrum 3300T receiver. I have all 3 available channels in use, throttle, steering, and aux. The bind slots and telemetry slots are open. Will the receiver capacitor work in the bind slot, if not them will it work in one of the telemetry slots.
Currently my system is sometimes glitching or cutting out under hard acceleration causing the motor RPM to oscillate.
Currently my system is sometimes glitching or cutting out under hard acceleration causing the motor RPM to oscillate.
04-27-2013 | 05:59 PM
#3
Telemetry Slot
I have a Novak Glitch Buster Receiver Capacitor, I need to connect to my Spectrum 3300T receiver. I have all 3 available channels in use, throttle, steering, and aux. The bind slots and telemetry slots are open. Will the receiver capacitor work in the bind slot, if not them will it work in one of the telemetry slots.
Currently my system is sometimes glitching or cutting out under hard acceleration causing the motor RPM to oscillate.
Currently my system is sometimes glitching or cutting out under hard acceleration causing the motor RPM to oscillate.
Last edited by TeamSkunkwerks; 04-27-2013 at 06:00 PM. Reason: OOPS!!
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
