|
Placement of receiver capacitor?
I have a Novak Glitch Buster Receiver Capacitor, I need to connect to my Spectrum 3300T receiver. I have all 3 available channels in use, throttle, steering, and aux. The bind slots and telemetry slots are open. Will the receiver capacitor work in the bind slot, if not them will it work in one of the telemetry slots.
Currently my system is sometimes glitching or cutting out under hard acceleration causing the motor RPM to oscillate. |
They will work in any open slot.
|
Telemetry Slot
Originally Posted by MajorKong
(Post 12092976)
I have a Novak Glitch Buster Receiver Capacitor, I need to connect to my Spectrum 3300T receiver. I have all 3 available channels in use, throttle, steering, and aux. The bind slots and telemetry slots are open. Will the receiver capacitor work in the bind slot, if not them will it work in one of the telemetry slots.
Currently my system is sometimes glitching or cutting out under hard acceleration causing the motor RPM to oscillate. |
It will work in any open slot.
|
Originally Posted by TeamSkunkwerks
(Post 12093051)
I'd use the the telemetry slot & forget about the bind slot.:nod:
|
It will work in any open slot. Use it to bind or telemetry slot. Also it can be used for any other slot.
|
| All times are GMT -7. It is currently 10:03 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.