TKR1654X is all 4 hexes in one kit with new pins and shims

I have run the "New Tekin Pro series " motors and have made the switch to Reedy 550 4.5 in my 4x4 SCT'S . You can always turn you power limiter down , and when you get to a big track turn it backup . No replacement for displacement . As far as truck upgrades go with the aluminum servo arms and wheel hexes .

Anyone know which servo horn fits hitec? I see letters on them but I see nothing telling me which letter is what tooth count?

I know this has been asked before, but what is the stock shock fluid front and rear equate to in say the losi oil. Trying to get a baseline of what the stock fluids are. Thanks.

Go with the Hot Bodies one and I believe Hitec is 25t

Don't think you understood my question. The kit comes with 3 servo horns marked F H and JKS but no where does it tell you the spline count for any of them. Does anyone know which horn is which?

Hitec has 24 splines. The one marked H should be for hitec.

All that info is in the first post

Futaba, ace, xp, savox, spektrum are all 25 spline.

I had one person tell me the 4pole was more power full than the 550 motor and two people say the 550 is more motor is the 550 motor smoother? I was told that last night at the track. I have a ride with Speed Passion so it will be something they sell.

The advantage of the 4 pole 540's is that they make comparable power to a 550 but in a smaller package - so the motivating factor is 1/3 less weight. Each type has a different power band. Both will hustle these 4x4's around the track.

7 year old Malin attended round #4 of the 2012/2013 JConcepts Challenge @ Mustit Raceway last weekend.

She ended up winning all her qualifiers, setting the fastest lap of the day, missing TQ by just over a second and qualified 2nd for the finals

She got a 3rd place finish in round #3 a couple of weeks ago and came prepared for round #4

She started running R/C cars in November 2012.

She also races 4WD mod buggy with her XB4.

Here's video from qualifying #1 where she set the fastest time for round 1 of the qualifiers (she was in heat 3 out of 4 total):

+ YouTube Video

Here's qualifying #2 where she went another 5 seconds quicker:

+ YouTube Video

Here's a pic of her setup:




Bent

This is the same motor I'm running Nd I'm very happy with it

Anyone know ? lol Just gonna order some fluid. thanks.

Thanks matt