I'm glad to get this information. Thanks guys!!!

What length turnbuckles do you guys use? According to the manual, it says front camber is 2.62" steering is 2.83" and rear camber is 2.81"

The actual turnbuckles are 2" in length. Not many measure the entire turnbuckle with ball cups. I just build the turnbuckle/ball cup, snap em on and check toe/camber. I dont measure them out before putting them on.

Do the rear ackerman holes give you more or less Ackerman?

more ackerman

Ok, crazy question here. I am looking at either a B4.1WC or a B4.2.
Amain has them with about a $30 difference in the price.
Is the 4.2 that much better even considering the 4.1 has 2 sets of shocks that comes with it?

Thanks!

Yes.

+1

Well since the consensus so far is the 4.2 is that much better.
I guess thats what I should go with, thanks!

do any of you guys have an extra b4.1 manual laying around you would be willing to get rid of? just tired of pulling up the manual online all the time and i dont have access to a printer to print it out
please pm me if you do

Is a noisy transmission a characteristic of this car? Its so loud compared to the other 2wd buggies at the track.

My two are not noisy at all.

Any idea what could be causing it? Motor maybe?

Don't really know. Depends a lot on what the noise sounds like. Could be gear mesh, could be a top shaft, could be an idler gear (not very likely), could be the diff. Just lots of things.

Not sure if I agree. Sell the V2 shocks for $30, spend $37 on some Avid hexes and steering rack and save $23 overall for the same rig.

Or sell the big bores for $70, run the V2's, glue the rack and buy some hexes. Save $83 overall. 90% of the people out there won't even notice a difference.