Het is talking about the P/S set and not the P/S/R set. The 35+ with the right rod (P2 I believe) goes fine.

35+ piston and sleeve will work, 359 run P type rods.

Thanks Roelof, dits wat ek bedoel het

Ive actually broken the crank on it already(known problem), I ended up putting a JP crank on it and I use a R7 rod, Im just not sure which P/S set to use. My research indicates a Flash P/S, but if the 35+ set is cheaper...


Nitrodud? Thats new one lol, my favorite is nitroduche! lol

maybe the cordoba set then cuase it had diff. rod too i think

What JP crank, Eagle does not work. Yes 35+ will work, if youwant to use R7 rod then you need to match the crank.

Bottom line 35+ will work. It is probably better spending money on a good used one or Kangaroo. It seems all you left with is crankcase, carb, bearings and button with head.

The collari editions of the 35+21 P/S will work.

Collari, Collari Cordoba, Collari Lostallo.

Thanks guys!

Dont waist your time with that P.O.S motor buy the stock picco for a practice motor My 359 lasted two fun%in races P.O.S

I'm thinking I might just buy a 35+ for club races, and keep my other 2 motors for big races, save my money and buy keepon for the nats, or maybe even a Virtus.

so the jp R9s is better than the 359 i take it

Um YES!!!!

Quick question - which Nova plug should be used in a .12 Keep-On and a .21 Keep-On? I'm new to .21 this year so I don't know but I have always used medium plugs for the .12s. I check the Nova plugs and they all seem to be hot or cold so I'm not sure which one to use for each motor.

Can parts still be found for the TN12/Mugen M12 and NS12S3/Mugen X12?

i actually have a brand new mugen x12