4LikesScale RC
02-20-2013 | 04:35 PM
#6226
Gaano ba kalaki tires mo bro? I use rc4wd tomahawks on my cc-01 it's around 3.9"-4" in diameter. Also using stock shocks, barely sumasayad naman sakin.
02-20-2013 | 04:57 PM
#6227
Jimuni.ss,
Have 2 spare servo. Will take alook at it...
Also would like to ask what setup do you guys run on your wraith? Just finished building mine. Placed a brushless motor on it. with the stock axial rx and tx and stock gearing. Hirap macontrol ang crawl niya. Also using a HW 60a Esc with drag brake. Parang pag mabagal nanginginig yung takbo niya. Di siya smooth?
Have 2 spare servo. Will take alook at it...
Also would like to ask what setup do you guys run on your wraith? Just finished building mine. Placed a brushless motor on it. with the stock axial rx and tx and stock gearing. Hirap macontrol ang crawl niya. Also using a HW 60a Esc with drag brake. Parang pag mabagal nanginginig yung takbo niya. Di siya smooth?
BY THE WAY....ANY OF YOU GUYS HAVE A SPARE Y LINK? KAHIT USED?
Last edited by mix237; 02-20-2013 at 05:12 PM.
hoping to see more new builds and new faces! keep em coming!
02-20-2013 | 06:37 PM
#6229
Tech Regular
Joined: Oct 2011
Posts: 359
yes sir, thank you.... at sa mga kapwa scalers... maraming salamat sa mga suporta at sana hindi kayo magsawa sa mga katulad namin newbies... it's an inspiration towards ongoing and growing hobby. thanks a lot bradirz...
02-20-2013 | 07:47 PM
#6230
Tech Adept
iTrader: (3)
Joined: Mar 2012
Posts: 108
Leonv,
Yup. Guess the thread is getting lively every day. I hoe parts and accessories will follow.
Mix237,
Yes sir its sensorless. Ive thought about it too.... I really need some help on setting this rigs. I dont want to buy any unnecessary parts anymore. Need help on setting the proper gearing, motor and esc combo (brushed or brushless) want to do water crossings and the like if possible.
Heres whats with my scx10
-Axial Stock 27t brushed motor and esc.
-pinion 15T, spur 87t 48 pitch (just recently replaced the stock pinion)
*should i change to a 32pitch gear or should i just wait for gears to break down before replacing them?
-cvd shaft up front (still having some jerking at full turn.)
-placed 70grams of wheel weights on both tires
-changed the servo to tower pro high torque.
-aluminum upper, lower and steering links
-aluminum steering hub
Actually im abit ok with the scx10. Just need to sort out whats with the jumping axle at full turn. Had water proofed the esc too and all the electronic. Needs some trail time to further test the rig.
Wraith (kit)
- hobbywing 60a esc with drag brake for brushless motor
-novatech 3500kv brushless motor
-towerpro hitorque servo
-stock gearing
I wanted to tame the motor abit. But likewise since its a sensorless motor it cogs at low speed. Thinking of replacing the whole esc motor combo. Any suggestion? Brushed or brushless? Im on a limited budget. I guess it would be much better if i go brushed so that i can have low speed control and good for water crossing? Whats a good combo? Kung brushless naman po mostlikely sensored. Medyo expensive na sila pero would appreciate your inputs.
Should i put weights on the front wheel too? Ive cut the foam inserts into star already...
Sorry for such a long read.... I got to excited lately and purchased this and that.thinking the build would be a breeze... Im damn wrong. Took me two straight days to assy the wraith... Just manage to finish the rolling chasis and installed the electoronics. Im still not done with the lexan body.... Do i really need to buy alexan scisors?
Waaaa... Im overloaded..... Im doing three rigs all at the same time.....waaaaaaa need to calm my self....
Yup. Guess the thread is getting lively every day. I hoe parts and accessories will follow.
Mix237,
Yes sir its sensorless. Ive thought about it too.... I really need some help on setting this rigs. I dont want to buy any unnecessary parts anymore. Need help on setting the proper gearing, motor and esc combo (brushed or brushless) want to do water crossings and the like if possible.
Heres whats with my scx10
-Axial Stock 27t brushed motor and esc.
-pinion 15T, spur 87t 48 pitch (just recently replaced the stock pinion)
*should i change to a 32pitch gear or should i just wait for gears to break down before replacing them?
-cvd shaft up front (still having some jerking at full turn.)
-placed 70grams of wheel weights on both tires
-changed the servo to tower pro high torque.
-aluminum upper, lower and steering links
-aluminum steering hub
Actually im abit ok with the scx10. Just need to sort out whats with the jumping axle at full turn. Had water proofed the esc too and all the electronic. Needs some trail time to further test the rig.
Wraith (kit)
- hobbywing 60a esc with drag brake for brushless motor
-novatech 3500kv brushless motor
-towerpro hitorque servo
-stock gearing
I wanted to tame the motor abit. But likewise since its a sensorless motor it cogs at low speed. Thinking of replacing the whole esc motor combo. Any suggestion? Brushed or brushless? Im on a limited budget. I guess it would be much better if i go brushed so that i can have low speed control and good for water crossing? Whats a good combo? Kung brushless naman po mostlikely sensored. Medyo expensive na sila pero would appreciate your inputs.
Should i put weights on the front wheel too? Ive cut the foam inserts into star already...
Sorry for such a long read.... I got to excited lately and purchased this and that.thinking the build would be a breeze... Im damn wrong. Took me two straight days to assy the wraith... Just manage to finish the rolling chasis and installed the electoronics. Im still not done with the lexan body.... Do i really need to buy alexan scisors?
Waaaa... Im overloaded..... Im doing three rigs all at the same time.....waaaaaaa need to calm my self....
02-20-2013 | 07:57 PM
#6231
May masama akong binabalak.
Dahil wala na si Da Hulk...
Introducing DOKTOR OKTOPUS!!!!!!
This kit is a mixture of RC4WD, Axial, 3Racing, and other parts. Yung mga tira tira ko lang. Wala na kasi akong kit so hinalughog ko yung mga stocks ko and old parts box. Siguro naman with that axle hindi na ako sasabit sa mga bato. bwahahaha!
By the way, meron siyang dig and 4 wheel steering pero inactive. Masyado nang madaya. hehehe.
Still trying to figure out what to use for a ladder frame, shocks, and body mounts.
Introducing DOKTOR OKTOPUS!!!!!!
This kit is a mixture of RC4WD, Axial, 3Racing, and other parts. Yung mga tira tira ko lang. Wala na kasi akong kit so hinalughog ko yung mga stocks ko and old parts box. Siguro naman with that axle hindi na ako sasabit sa mga bato. bwahahaha!
By the way, meron siyang dig and 4 wheel steering pero inactive. Masyado nang madaya. hehehe.
Still trying to figure out what to use for a ladder frame, shocks, and body mounts.
02-20-2013 | 08:03 PM
#6233
Tech Adept
iTrader: (3)
Joined: Mar 2012
Posts: 108
Oh by the way ive read some where when using a high torque servo your rig needs to have a bec? Also whats the advantage of running a 3s lipo? Dipo ba mas bibilis siya?
F48,
Nice axles.... Will wait for your upcoming build.... Had placed the cvd already! Na lessen na yung jumping but its still there....
F48,
Nice axles.... Will wait for your upcoming build.... Had placed the cvd already! Na lessen na yung jumping but its still there....
02-20-2013 | 08:37 PM
#6234
DOKTOR FRANKIE.. 
Dahil wala na si Da Hulk...
Introducing DOKTOR OKTOPUS!!!!!!
This kit is a mixture of RC4WD, Axial, 3Racing, and other parts. Yung mga tira tira ko lang. Wala na kasi akong kit so hinalughog ko yung mga stocks ko and old parts box. Siguro naman with that axle hindi na ako sasabit sa mga bato. bwahahaha!
By the way, meron siyang dig and 4 wheel steering pero inactive. Masyado nang madaya. hehehe.
Still trying to figure out what to use for a ladder frame, shocks, and body mounts.
Introducing DOKTOR OKTOPUS!!!!!!
This kit is a mixture of RC4WD, Axial, 3Racing, and other parts. Yung mga tira tira ko lang. Wala na kasi akong kit so hinalughog ko yung mga stocks ko and old parts box. Siguro naman with that axle hindi na ako sasabit sa mga bato. bwahahaha!
By the way, meron siyang dig and 4 wheel steering pero inactive. Masyado nang madaya. hehehe.
Still trying to figure out what to use for a ladder frame, shocks, and body mounts.
02-20-2013 | 11:34 PM
#6236
Sir silent_racer17 sumama ka na kasi ulit sa Sunday afternn Feb24 sa P&W tayo!
Whoa! Sir Factory48 excited na ako makita result niyan bago mong project.
Whoa! Sir Factory48 excited na ako makita result niyan bago mong project.
02-21-2013 | 06:21 PM
#6240
Tech Rookie
Joined: Feb 2013
Posts: 19
Leonv,
Yup. Guess the thread is getting lively every day. I hoe parts and accessories will follow.
Mix237,
Yes sir its sensorless. Ive thought about it too.... I really need some help on setting this rigs. I dont want to buy any unnecessary parts anymore. Need help on setting the proper gearing, motor and esc combo (brushed or brushless) want to do water crossings and the like if possible.
Heres whats with my scx10
-Axial Stock 27t brushed motor and esc.
-pinion 15T, spur 87t 48 pitch (just recently replaced the stock pinion)
*should i change to a 32pitch gear or should i just wait for gears to break down before replacing them?
-cvd shaft up front (still having some jerking at full turn.)
-placed 70grams of wheel weights on both tires
-changed the servo to tower pro high torque.
-aluminum upper, lower and steering links
-aluminum steering hub
Actually im abit ok with the scx10. Just need to sort out whats with the jumping axle at full turn. Had water proofed the esc too and all the electronic. Needs some trail time to further test the rig.
Wraith (kit)
- hobbywing 60a esc with drag brake for brushless motor
-novatech 3500kv brushless motor
-towerpro hitorque servo
-stock gearing
I wanted to tame the motor abit. But likewise since its a sensorless motor it cogs at low speed. Thinking of replacing the whole esc motor combo. Any suggestion? Brushed or brushless? Im on a limited budget. I guess it would be much better if i go brushed so that i can have low speed control and good for water crossing? Whats a good combo? Kung brushless naman po mostlikely sensored. Medyo expensive na sila pero would appreciate your inputs.
Should i put weights on the front wheel too? Ive cut the foam inserts into star already...
Sorry for such a long read.... I got to excited lately and purchased this and that.thinking the build would be a breeze... Im damn wrong. Took me two straight days to assy the wraith... Just manage to finish the rolling chasis and installed the electoronics. Im still not done with the lexan body.... Do i really need to buy alexan scisors?
Waaaa... Im overloaded..... Im doing three rigs all at the same time.....waaaaaaa need to calm my self....
Yup. Guess the thread is getting lively every day. I hoe parts and accessories will follow.
Mix237,
Yes sir its sensorless. Ive thought about it too.... I really need some help on setting this rigs. I dont want to buy any unnecessary parts anymore. Need help on setting the proper gearing, motor and esc combo (brushed or brushless) want to do water crossings and the like if possible.
Heres whats with my scx10
-Axial Stock 27t brushed motor and esc.
-pinion 15T, spur 87t 48 pitch (just recently replaced the stock pinion)
*should i change to a 32pitch gear or should i just wait for gears to break down before replacing them?
-cvd shaft up front (still having some jerking at full turn.)
-placed 70grams of wheel weights on both tires
-changed the servo to tower pro high torque.
-aluminum upper, lower and steering links
-aluminum steering hub
Actually im abit ok with the scx10. Just need to sort out whats with the jumping axle at full turn. Had water proofed the esc too and all the electronic. Needs some trail time to further test the rig.
Wraith (kit)
- hobbywing 60a esc with drag brake for brushless motor
-novatech 3500kv brushless motor
-towerpro hitorque servo
-stock gearing
I wanted to tame the motor abit. But likewise since its a sensorless motor it cogs at low speed. Thinking of replacing the whole esc motor combo. Any suggestion? Brushed or brushless? Im on a limited budget. I guess it would be much better if i go brushed so that i can have low speed control and good for water crossing? Whats a good combo? Kung brushless naman po mostlikely sensored. Medyo expensive na sila pero would appreciate your inputs.
Should i put weights on the front wheel too? Ive cut the foam inserts into star already...
Sorry for such a long read.... I got to excited lately and purchased this and that.thinking the build would be a breeze... Im damn wrong. Took me two straight days to assy the wraith... Just manage to finish the rolling chasis and installed the electoronics. Im still not done with the lexan body.... Do i really need to buy alexan scisors?
Waaaa... Im overloaded..... Im doing three rigs all at the same time.....waaaaaaa need to calm my self....