RC4WD http://store.rc4wd.com/ or RPP Hobby https://www.rpphobby.com/ or, you can always order from Jess if you like something from RC4WD.

I have no experience shipping it directly here, usually nakikipadala lang din. Other members might have experience on shipping it here.

But like sir mix's advice, just keep on checking our threads or the buy and sell thread and most likely you'll find what you're looking for.

If you want to save cash, just build it. This is what scalers enjoy most.

Leonv,

Thanks for the link.... Im looking forward to this new hobby. Looks like i have a new stress buster..

Stpaul,

Sir kelangan ba water proof sa parks and wildlife? Bare stock pa kasi yung jeep.

gud day mga sir, papatulong sana ako kasi bago alng ako sa hobby na to, pangolin po ung crawler ko na 1:10 scale, papaturo lang po sna ako kung paano po mag water proof ng servo, nag try na ako sa youtube pero di ko po kasi sigurado kung yung mga grease na nilalagay nila dun eh meron sa mga hardware natin dito at may iba kasi nilalagyan pa ng o-ring yung sa horn. eh san po ba ako makakakuha nun? pls help
thanks in advance guys

Sir kahit hindi muna. Sa batuhan lang naman tayo. Magagasgas lang jeep mo hindi pa mababasa!

Wow! ganda nyan sir mix!

So it's dusty's track tayo this 17th? Sabay ako sa carpool. Share nalang sa gas and toll fee!

I used ordinary automotive grease available on any auto supply. Filled the gears part of the servo. Then I used RTV, also available on any auto supply. Applied it on the electronics side on the servo naman! Apply it on all the cracks and openings on the servo body casing.

Hope this helps. Happy trailing and crawling and welocome to our very addicting hobby! Attend our almost weekly gathering para enjoy! As mix said "malungkot magtrail magisa!"

Stpaul,

Copy that..... Lets roll... Looking forward this weekend... Sakto punta din kasi ako sa qc.

For the Feb 17 comp, I should have alot of stuff to raffle off. Everyone will get something. I'm also bringing alot of RC4WD parts for sale at a discount.

Liked!

naku sir maraming salamt po sa pagturo kung paano. ang totoo po niyan mali pala ako ng pinuntahang forum, hehe nasa scale pala ako dapat pala sa crawlers pero sakto lang din pala kasi mga scale nman talga madas mag water proof ng electronics, matgal ko ng hinahanap kung paano gawin tong sa servo eh, eh yung sa youtube kasi wala nman akong makitang plasti dip sa mga hardwares dito sa atin pati yung marine grease, (napanuod ko sa youtube yung kay rc sparks). tnry ko din mag post sa prcd sa tech ehehehe napaaway pa ako kasi sabi sa akin saan ba daw ako mag ddrift na may tubig =) kaya salamt talga sir STPAUL. btw sir gusto ko din po pala magpaturo kung paano nman iconvert tong crawler ko into scale, meron akong nakilala na sa fb na tga davao na nag convert ng ax10 scorpion king, sabi niya sa akin ladder frame lang daw, san po ba ako na shop makakabili nun pati yung mga brass tubes? thanks in advance

@legolasgonzales, serch my previous post. Makikita mo yung pangolin ko converted to * ladder frame scale crawler.

Your welome nga pala. Tama mga prcd guys. Walang drifting sa tubig!

sir tanong ko lang po. diy niyo po ba yung panggolin na naka frame ladder? san po ba nakakabili nung frame ladder na yun sir at kung may mga sukat pa po ba yun?

just had the front solid axle of my tf2 re-shimmed and replaced the rusted and stuck ball bearings with greased bushings. was actually surprised how deep mud could ruin your bearings. lesson learned, grease and clean the mud right away. dont let it settle and dry. tsk tsk..

was also considering the idea of keeping the bushings there instead of bearings. they both need to be greased and cleaned anyway, any ideas if this would work? with the way I use my rig, I think my bearings would get rust anyway so why not use bushings, they're cheaper to replace than bearings.

sir jess do you have this kind of product?
http://store.rc4wd.com/Cyclone-24mm-...ors_p_163.html
wheel adaptor ba yun, parang mas ok kasi yan kesa naka direct yung mismong wheel hub ng rc4wd wheel sa axle shaft.
sir mix yan ba yung inquire mo dati, naalala ko lang nagpost ka ng ganyan?

Yup! Built from scratch ang ladder frame ng dingolin. From T6 aluminum sheet. Walang nabibili locally ng frame but you can either order online or from jess of crazy crawler. Aka f48. I think!