Hey YankeeFan I have this charger on the way from A-Main. http://www.amainhobbies.com/product_...-6S-6A-50W-x-4 I can't really tell from the description but I'm running Gen'sAce bullet style batteries which don't have a balance plug. Do I need to purchase anything more or can I charge these with the charger as is?

Thanks man.

It changes the roll center. Making it feel lower to the ground.

Yes that's the charger I have/use, what do you mean it doesn't have a balance plug?

I also have some gens ace and I don't know what you mean.

The Gens ace does not have a balance plug coming out of the battery. It uses a balance port with the small bullet connector. In looking at the plugs it comes with I don't think it has the right one to charge with 3 bullets on the battery end. What are you using on your Gens Ace packs

http://www.teamassociated.com/pdf/ca...ceway_2012.pdf
http://www.youtube.com/watch?v=3_UrCRICetU&feature=plcp

Theres the track I run on.

I am currently running 3D's in green and they feel good. (Aren't 3D's like a mix of Double Dees, Goosebumps, and Barcodes?????)

Can you use the the B- hubs with the shaved brace on a medium to high bite track, and how will that work together

C hub lowers the roll center.

Not a big fan of the AE design this should be a big improvement. I've seen them from 9-11 dollars a set but they say they won't have them until late Dec.

3d's are not the same as double dee's. They are a bar style tire with pins. I have never seen them in use, but from what I have read they are for dry dusty hard tracks, which yours appears to be. but in that video I see a bit of blue groove. Still that is way higher bite than the Double Dee tire tracks here. We can rooster down the straights

lThese are the Gen'sAce batteries I use. http://www.hobbypartz.com/98p-50c-50...case-2222.html I have to use the banana plug adapter now. I'd like to lose the banana plugs.

I guess I could snip them off and solder on some bullet plugs.

take a picture RC, i think we are lost

yes, you can add 2 washers to get back to the unshaved height also. I am running the shaved brace with 1 washer and the B hubs. so thats kinda like -1 washer. and right now i really like it on my track (medium bite) it locked my car in a bit and it feels better to me. I have tried standard b and the c hub mod as well. i am about 1/2 a second faster average since the change.

maybe not for everyone tho, im no expert, but im not bad

I may give it a shot for a change. I am a B-Mainer at best so probably won't notice a difference.

im a upper b-mainer to A-bumper, haha i did feel a difference, you will if you test back and forth a few times to get the feel

Sorry I edited the original post. But here is my battery http://www.hobbypartz.com/98p-50c-50...case-2222.html