It's hard to say at this point. I seen Schumacher mini pins, Jc barcodes, Losi ifmar mini pins, and blad tires with some paragon on them and thay all seem to work fine.

i am going to stop in wendsday night to run a few packs....i have made my own version of a shock cover, would the person who is making them bring one for me on saturday if my version doesnt fly??

thank you

matt

Aric Seffrood is using a cut up pepsi bottle - I'm sure you will be fine.

there was a variety from schumacher mini pins- to jconcept bar codes

Here is a example of a shock tower cover. My shocks are on the rear of the tower so I bolted it to the front and bent it back and I put some vinyl over the front bolts. If you have the shocks up front start from the back bend over the top then down over the shock caps done.

The buggies looked very cool indeed! I stayed long enough with Miles to watch a heat of everything. The only thing I haven't seen so far is what motors fit the track. I'm guessing 13.5 or 10.5 is more than enough power.

Where you able to try out the Dboots and the mini pin fronts on wednesday. Our any other combination. Just wondering, Im going to put in another order to AMain this wkend and just wondering what to get. Dboots is threw Great Planes. I know Im geting the cut stagger fronts for sure.

Thanks.

so....i ran cut staggers in yellow, no insert..in the front, i have not tried the dboots blockpass yet...i will saturday,

i did try dboots terra bites in the rear as i spun a rim on my shumacher tires...

i liked them....i tried shuie mini pins on the front, the car was driveable, but it had incredible steering...very twichy...

car was better with some of the changes i made...

as for tires, i dont thik you ca go wrong with either...

As far as life of tire do think dBoots or mini will last longer? The minis seem to wear pretty good. I know it's early but IYO.

My gut says the dboots terabytes will last longest....but it will take me a week or so to know for sure....

I am going to acetone the used mini pins off nod remount them....so far I have a lot of time on them... I want to see how long they will go

Miles starts his first kit build tomorrow, a TLR 22 buggy. Mine doesn't come in to PHC until Tuesday. We should be ready for the buggy class in a couple weeks once all the components arrive and get put together. I still have to order tires and possibly batteries. I like the thought of using shorties. We're going to try Hobbywing Xtreme ESCs and Xerun 10.5 motors. I've had great luck with their Justock ESC in other cars. I hope its not too much motor for the track though.

Thats awsome! Add two more to the class!

I ordered tires today, hopefully they will be in to run sometime in december!

Hoping for no postal delays here. All should be ready for 1st week in December.

The new buggies are ready for soldering, tire gluing and paint. They should be ready for Saturday.