Upgrades for Honcho?
#1
Thread Starter
Tech Rookie
Joined: Oct 2012
Posts: 5
From: Edwardsville, Il
Hello Im new to RC and new to scaling. Im going to buy the Axial SCX 10 honcho and was wondering what are some essential upgrades that would be best/cheapest to start with? If you could post some links to the items so I know where to go. I already have the upgraded drive shaft picked out, as I have heard the stock ones break easy. Thanks in advance.
#2
Tech Fanatic
iTrader: (83)
Joined: Feb 2012
Posts: 996
From: PA
The stock servo is Ok but would be good to replace with a high torque Savox or Hitec etc...with BEC. Replace the plastic links is not a bad idea and get some aluminum CHubs and Knuckles. They are petty good out of the box and nothing i mentioned is necessary right away but good upgrades to consider. Have fun with it!
#3
Tech Fanatic
iTrader: (83)
Joined: Feb 2012
Posts: 996
From: PA
If you haven't been to www.rccrawler.com you should go there. If you fork up $20 to join you have access to the classifieds where you can find some great deals too
#4
Thread Starter
Tech Rookie
Joined: Oct 2012
Posts: 5
From: Edwardsville, Il
Great! Thanks for the input. I will have to check the parts out. Been checking out the forum site you suggested, its awesome! I'll have to wait to get the elite membership until I get the money, but it definitely get on that.
#6
Joined: Oct 2010
Posts: 3,679
From: lords valley pa
Hello Im new to RC and new to scaling. Im going to buy the Axial SCX 10 honcho and was wondering what are some essential upgrades that would be best/cheapest to start with? If you could post some links to the items so I know where to go. I already have the upgraded drive shaft picked out, as I have heard the stock ones break easy. Thanks in advance.





