We are in the process of doing this at the moment, if there's anything specific you need, let me know

up

I have gathered some here

i am thinking about buying a hobbywing esc for 1s oval racing. is there a performance difference between the 120a 1s esc or the new v3 esc?

thanks

Just installed an xtreme stock esc in my sons car when I hooked up the program box it comes up with dashes and thats all doesn't do nothing even leaving it for in excess of 1 minute. Did install one in another car the other day and didn't have a problem.

Any ideas.

Noel

13.5t Open Timing is needed

...and 17.5
I have spent hours trying to find a starting point for stock. It would be nice to dial in from there. If anyone can point me in the direction of 17.5 (Australia) settings - I'd be grateful.
Thanks

It does help if you post what motor and ESC V2 or V3 - the settings can vary depending on the motor & ESC you are running.

Hook it up to your PC and try flashing it.

(using latest software for v2.1)
Start 3000-4000
Boost 40
Turbo 24
timing acc 250-350
turbo ramp 12
delay 0

Gearing... 5.0 (Large) - 6.5 (Small)

For Logan (Never been there only seen pictures) try 5.0-5.5 (Looks pretty big/open)

Phill

Would just like to put out a big thanks to Angelo for his help, support and goodwill with Hobbywing products.

The service that a friend and I received went above & beyond our expectations.
I've been very happy with Hobbywing products and will positively recommend them to others.

Cheers
Rob.

Thanks Phil. It's good to see what other people are using.

Cheers Barry. I totally agree, but it would still be great to have a library of settings with all the info like Tekin does. You could match something up that is reasonably close to what you use and go from there.

I've just bought a V3. I had my V2 going very well with a revtech. I was hoping to try the revtech and the lrp x12 17.5 with the V3 on a medium/large track with plenty of tight corners. So, top speed and punch is the target.

Thanks for your help fellas, it's much appreciated.

V3 with SP 3.0 13.5t

could somebody explain the throttle punch function? i am running modified 4,5 and 5,5 motors and cant get those settings right...