Post pics of ur boats
#346
This is my first boat JAE 21G
#347
#348
Update: I took the 1500Kv brushless motor/45 amp ESC combo out of my Miss GEICO and put it in the Impulse 26 (below)! The boat is now faster than green grass through a goose!
Then, I bought a new ProBoat 1800Kv brushless with the 60 amp ESC for the Miss GEICO. Its all installed, mounted and trued up, but I've not had a chance to run it yet (My last boating day was cut short). It should be a speed demon too!
Then, I bought a new ProBoat 1800Kv brushless with the 60 amp ESC for the Miss GEICO. Its all installed, mounted and trued up, but I've not had a chance to run it yet (My last boating day was cut short). It should be a speed demon too!
#349
Thats one fine looking boat you got there Indyhobbies
#350
Thanks Walker! Not to minimize what you are saying, but it literally was just having the courage (fear of screwing up!) to strip the existing decals, use some rustoleum RED and some cool decals that I've gathered. The "LUCAS OIL" on the sides I hand cut with an X-Acto over a Xerox copy of the lettering. That was the hardest part. The Rustoleum spray paints take a while to dry compared to Krylon, but they seem to grab a lot better. Just my personal opinon.
#352
Miss Exide
Here's my Scale Miss Exide
#353
#356
#357
Tech Adept
I built this 16" HydroMite a few months ago.
#360
Current project, the hull was donated by someone locally.