RC10B4.1 FT/WC

Reply Subscribe

Thread Tools

Search this Thread

10-04-2012 | 09:08 AM

#21541

Wild Cherry

Tech Legend

Joined: Aug 2001

Posts: 22,595

From: TRCR Modified Driver

New Ae BB

No LEAKS so far ....

10-04-2012 | 09:12 AM

#21542

gamedog1966

Tech Addict

Joined: Mar 2011

Posts: 550

From: Tacoma, wa

Quote:

Originally Posted by CHIZZLE

In that turn, he should have checked up more so as to not clip the dude. In my opinion, it's not a passing "I got the inside line" corner. I would have have pulled over.

And does it matter if it was an accident or intentional? I'd say most of the time, they're accidents. Doesn't make it okay to just keep going.

+1 they teach racing coutesy at my track during club race, give the guy his spot back and start racing again. Mayb an accident but he should have not kpt going off a wreck he caused

10-04-2012 | 09:19 AM

#21543

mjk1210

Tech Elite

iTrader: (9)

Joined: Sep 2008

Posts: 4,539

Quote:

Originally Posted by Rysuleod

Vid here: http://www.youtube.com/watch?v=3_UrCRICetU&feature=plcp

So my question to you guys is: It's a big race and this happens to you. If you come out ahead do you keep going?

He should have waited. Even if it meant that they ended up last and 2nd to last at that point. My .02.

10-04-2012 | 09:24 AM

#21544

GuiltyByAssoc

Tech Regular

iTrader: (6)

Joined: Jun 2011

Posts: 413

From: LA, Cali

Quote:

Originally Posted by CHIZZLE

...
And does it matter if it was an accident or intentional? I'd say most of the time, they're accidents. Doesn't make it okay to just keep going.

Yep, its what you do afterwards that showcase your character.

10-04-2012 | 09:36 AM

#21545

FLHX1550

Tech Master

iTrader: (11)

Joined: Mar 2010

Posts: 1,712

From: Wyoming, MN

Quote:

Originally Posted by CHIZZLE

My bad, I guess I didn't realize "big wigs" were allowed to f#ck people out of a race.

The guy in front over jumped the double, landed wide and tried coming down to shut the door. Ruona's car was already at the apex. Dude was 3 or 4 car widths off the pipe.

The guy leading took himself out, and very well could of taken the top 3 qualifiers out with that move.

10-04-2012 | 10:05 AM

#21546

ovalracer1m

Tech Master

iTrader: (29)

Joined: May 2006

Posts: 1,173

From: Alexandria, MN

Quote:

Originally Posted by Wildcat1971

I dont see a grub screw. wonder if they are less sloppy than the AE ones. btw, I like the hubs and I will probably try them.

Go for the racers edge hubs, they have a grub screw, bearings fit tight. Ballstud with no washers is almost exactly the same height as the carbon hub towers....They have 4 stud locations, same spacing as the A towers.

Last edited by ovalracer1m; 10-04-2012 at 10:24 AM.

10-04-2012 | 10:16 AM

#21547

Wild Cherry

Tech Legend

Joined: Aug 2001

Posts: 22,595

From: TRCR Modified Driver

Nice hubs , can you use the c-brace with ?....

10-04-2012 | 10:24 AM

#21548

MikeFriery

Tech Master

iTrader: (19)

Joined: Jul 2004

Posts: 1,368

Quote:

Originally Posted by ovalracer1m

Go for the racers edge hubs, they have a grub screw, bearings fit tight. Ballstud with no washers is almost exactly the same height as the carbon hub towers....

no washers with a short neck ballstud should be exact as c-tower

10-04-2012 | 10:27 AM

#21549

ovalracer1m

Tech Master

iTrader: (29)

Joined: May 2006

Posts: 1,173

From: Alexandria, MN

Quote:

Originally Posted by MikeFriery

no washers with a short neck ballstud should be exact as c-tower

thanks for the clarification, yes that is with the short black ballstud, .300 i believe.

10-04-2012 | 10:27 AM

#21550

skrichter

Tech Fanatic

iTrader: (13)

Joined: Mar 2007

Posts: 894

From: Wisconsin

Quote:

Originally Posted by ovalracer1m

I only see .5deg and 1deg towers...no 0deg

10-04-2012 | 10:35 AM

#21551

ovalracer1m

Tech Master

iTrader: (29)

Joined: May 2006

Posts: 1,173

From: Alexandria, MN

Quote:

Originally Posted by skrichter

I only see .5deg and 1deg towers...no 0deg

Yeah, right now i have the 1 degree hubs on my sc10 (we race on pretty low bite tracks usually). I believe they used to make 0 hubs but no longer do that i can find... thats a shame

http://www.racers-edge.com/Associate...e_com_s/63.htm

Last edited by ovalracer1m; 10-04-2012 at 10:49 AM.

10-04-2012 | 11:00 AM

#21552

MikeFriery

Tech Master

iTrader: (19)

Joined: Jul 2004

Posts: 1,368

Quote:

Originally Posted by skrichter

I only see .5deg and 1deg towers...no 0deg

This is true.. but i would rather change my setup to 2.5/.5 then have a half degree of variable toe with the stock hubs.. but thats just me

10-04-2012 | 12:13 PM

#21553

bilster44

Tech Addict

iTrader: (1)

Joined: Mar 2006

Posts: 667

From: Sactown, Ca

Quote:

Originally Posted by Wild Cherry

No LEAKS so far ....

You have to run them for that to happen...LOL!

10-04-2012 | 12:32 PM

#21554

Eli

Tech Master

iTrader: (15)

Joined: Apr 2010

Posts: 1,553

From: San Diego, CA.

Quote:

Originally Posted by Wild Cherry

No LEAKS so far ....

Im surprised at how smooth they are they don't just leak all over the place. I ran mine for the first time last night and wow, it really settles the car out and makes driving it a lot easier. Went .2 faster then my previous fast lap

Ran the kit oil and piston recommendations however i ran the kyosho white fronts and gold rears since the ae springs i cant get yet.