57LikesThe Speed Passion Thread
09-29-2012 | 09:26 AM
Tech Fanatic
iTrader: (40)
Joined: Sep 2010
Posts: 767
From: Aurora, CO
Mine works fine under Windows 7. Updating the card on with version 17 gives me one choice, v1.3. After installing this, the programmer shows the same issue as before in the fact that the display no longer works. It connects to the ESC through the computer fine though and setting the ESC/updating the program is seemless.
09-29-2012 | 07:30 PM
Joined: Feb 2009
Posts: 3,228
From: Fort Wayne, IN
Ok.
Go to your user control panel,select add remove program's.
Get rid of what you have downloaded,restart pc.
Go to speedpassion,download the interface/ program.
Get hold of another pc/ laptop/phone or whatever and follow that video to the letter.
Then at the end you update the LCD programmer by holding in the reset button AND plugging into USB port.
It will then say on the programmer " UPDATE FIRMWARE"...click "yes".
It will take approx 4-5 minutes.
And yes I'm running windows for this process.
If it doesn't work,we will have to organise a Skype conversation so I can show you how to do it.
Or I'll fly over...LOL
Good luck,let me know how you go.
Wipe that pc first!!!!!
Regards
Tim Phillips
Mobile: 0416973325
Go to your user control panel,select add remove program's.
Get rid of what you have downloaded,restart pc.
Go to speedpassion,download the interface/ program.
Get hold of another pc/ laptop/phone or whatever and follow that video to the letter.
Then at the end you update the LCD programmer by holding in the reset button AND plugging into USB port.
It will then say on the programmer " UPDATE FIRMWARE"...click "yes".
It will take approx 4-5 minutes.
And yes I'm running windows for this process.
If it doesn't work,we will have to organise a Skype conversation so I can show you how to do it.
Or I'll fly over...LOL
Good luck,let me know how you go.
Wipe that pc first!!!!!
Regards
Tim Phillips
Mobile: 0416973325
Last edited by kwiksi; 09-30-2012 at 07:32 PM.
09-30-2012 | 04:44 AM
09-30-2012 | 05:03 AM
The 10.5 felt like a strong 5.5 motor
09-30-2012 | 07:00 AM
09-30-2012 | 06:49 PM
Tech Fanatic
iTrader: (40)
Joined: Sep 2010
Posts: 767
From: Aurora, CO
I tried the 17.5 MMM at a 95 rollout with stock timing and the car felt flat. Dropped it closer to what I run my 1 cell at and it woke up on the infield without losing any speed on the straight. I didn't get a chance to play with timing but likely will during the IIC practice. My question is, what difference will I notice with more timing. Will I get more punch or more speed if I leave the gearing the same. Motor temp was only 120 with the 95 rollout and 106 at the lower. The 1 Cell generally comes off at around 98ish. In case anyone is wondering, the lower roll out was 2 tenths faster each lap overall.
09-30-2012 | 08:07 PM
I'd say from outside us, not going to happen. And to be honest not a good chance at all even from the us warehouse.. I usually get my orders from us site in about 6-8 days or more... They take a day or two to process your order and then off to shipping...
09-30-2012 | 09:32 PM
i ordered mine from rcmodel.hk.........i got mine in 4 days via ems.....but i do live in australia though......im guessing you would have to wait a minimum of a week maybe more
09-30-2012 | 09:37 PM
i've gotten shipments from EMS (rcmart.com order) to Canada in 4 days too, fast shipping .. if you can find what you need in HK and need it quick and are willing to pay the $$, you should get it in time ..