Touche' sir

I got your back...

I've had my Losi 8E 2.0 for a year now and want to increase my total caster. What degrees are the stock spindle carriers (losa1709)? If I get the 10 degree
Carriers will that increase the total caster to 20 degrees? Or is that the stock
Total caster now. If so, I might need to get the 12 degree carriers.(22degrees)
Also when increasing the total caster, will that be better for high bite tracks or low Bite tracks? And do I need to decrease the camber also after increasing caster?

Man. I run a plastic spur in a Truggy on a 5-cell! No problems . . .

Total stock caster is 20 degrees. You can increase it by getting the 12 degree spindle carriers to make a total of 22 degrees.

Increasing overall caster helps in higher speed and/or bumpy and rough tracks. Less caster will gain you more steering, in both angle and "feel."

12 spindles make 24 caster.
10 spindles make 20 caster.
Always check camber, ride height, toe when changing parts.

Hey Losi Guys Just a quick update for you Brushless Racers!
we have so many request to offer our new 2.0 chassis for the Electric guys to help out with the weightand add better handling. here is our 013 L2.0TE And L2.0BE Pro Chassis they are now online at the BCESPEED site, thank you all for your emails. if you have any questions feel free to drop us aline on site.

L2.0 Nitro and E-Pro


L2.0T Nitro and E-Pro


Our newest very light weight Pro Level Racing chassis, for the Losi 2.0TE competition Brushless Racer With Over 2.oz weight savings, This is a dedicated "Electric Only Pro Chassis", we have removed all of the factory plastic adapters, so you can now mount your motor direct to the chassis using only small shims to set your spur clearance. This helps reduce over all C/G and helps added handling. This is a must for the serious Brushless Racer. Made from our U.S. Mil Spec 7075 T6 Billet.. The Racer reviews have been great

I can say the BCE pro chassis is worth every cent, I was/am a tester and the fit and finish of the chassis is outstanding

Looks great. I think the one in the first pic is mine. See attached - my name is etched in it already.

In all seriousness, hope these ship soon! Put my order in on July 27 and I've been looking on my doorstep everday for the magic box.

I'm after some new 4s cells for my 8e, soft or hardcase doesn't matter really.

Any suggestions?? Been looking at Turnigy and Gens ace packs so far...

Want 6000mah really as need 20 mins run time on 2000kv motor

Anyone else notice here lately that Losi is placing the shock in the outer hole on the a arm on the gas 2.0? I have been running mine on ebuggy in the inner hole(drake setup) calls for it to be mounted there. Anyone tried just moving too the outer hole on ebuggy and leaving everything else the same? What affect did it have? Thanks

Brian

Headling. Take a look at these SMC's. Danny from SMC is a great guy and his batteries are awesome.
http://www.smc-racing.net/index.php?...&product_id=83

I personally run Maxamps and swear buy them--irrespective of the co$t. Most guys in my area run Gens Ace w/o any major issues.

I am wearing out my 2nd and just ordered my 3rd. They are well worth the wait. I bought one of the first E-Lines for my buggy a few years ago and did take quite some time. The 2nd one came within a week but you might have to wait a little while due to the nature of the business. Awesome chassis and worth evry penny + time to ship. Bill at BCE is a great guy and stands behind his products.

Well I just purchased an e buggy. Looking to drop some electronics in it. Not sure whats popular for this buggy. As Im just getting into 1/8th scale again. Any help would be great. Thanks! HELP HELP HELP!