SC10 4x4 Thread
i know i am new to this forum but i have been reading from post 1400 untell now and i see a lot of people having truble tuning there trucks i have spent the last 2 mounths diving every day at 2 tracks in san antonio every time i dive i chang some thing and the truck for the most part is on ralls many of the setups on here are grate plase to start but there is one ajustment you all fall to us and that is an up travel limit in the front 2mm this truck has a lot of travel and that is y people see it work beter with other brand shocks they are shorter
the setup
steering rack standerd
bump 0
career 2mm
arm outer hole
tower mid hole
spring yellow
bar 2.2 yellow
sink long tower 2mm
polly 19 overdrive
tentioner #5 hole
foll time 4x4
front 25w piston 1.3 with 2stage mod and 2holes drilled out 1/16
2mm rebound limit 6mm up
rear 20w same piston
0 rebound 4mm up
bar 2.0 blue
spring f blue
8mm mod mid holl
tower 2mm, long link
arm outer hole
tower mid
polly standerd 20
standerd sliper 2.5mm(new nut any time it gets to hot
tention #2
wheel base long
3-2
ride h 21mm
battery stick
3oz next to servo(not needed for good handeling )
rx8 4600 14t-62 amp limit 65% push 7% timing min 5'(4700uf cap)
savox sc-1256tg(4400 cap)
camber 1.5 all
tires callibers fole tred
diffs 30k-7k
the setup
steering rack standerd
bump 0
career 2mm
arm outer hole
tower mid hole
spring yellow
bar 2.2 yellow
sink long tower 2mm
polly 19 overdrive
tentioner #5 hole
foll time 4x4
front 25w piston 1.3 with 2stage mod and 2holes drilled out 1/16
2mm rebound limit 6mm up
rear 20w same piston
0 rebound 4mm up
bar 2.0 blue
spring f blue
8mm mod mid holl
tower 2mm, long link
arm outer hole
tower mid
polly standerd 20
standerd sliper 2.5mm(new nut any time it gets to hot
tention #2
wheel base long
3-2
ride h 21mm
battery stick
3oz next to servo(not needed for good handeling )
rx8 4600 14t-62 amp limit 65% push 7% timing min 5'(4700uf cap)
savox sc-1256tg(4400 cap)
camber 1.5 all
tires callibers fole tred
diffs 30k-7k
Tech Regular
iTrader: (4)
Joined: Jul 2012
Posts: 451
From: tx rchq
wednesday was racing i took 6th q out 18 divers 36s per lap but no recks tq was 30s and i went last night and had ellit the trake MG dive it and he was doing back to back 29s and 30 and that was with a bad diff baring i asked him if i should chang any thing he said no just dive it harder. so if any one said this truck is not good out doors they would be rong and in the hands of the winner wednesday dock as we call him i think 2nd place would have got lapped in the 8min Amain
Tech Regular
iTrader: (4)
Joined: Jul 2012
Posts: 451
From: tx rchq
wildcat i was hopping you would get some good use out of the setup i see you on here all the time all was bitching about you truck i would love to help you with it you dont need money for this truck just track time
Honestly, for me the best thing about the sport right now, is teaching my 7 year old daughter to race. Last night i was explaining what a receiver, esc, transmitter and servo we and how that worked together. he was listening and very excited.
Last week, I ran 3 classes and was charging and working on cars the entire time and missed all of her heats and mains. She took second place in the second heat and i missed the entire thing. So I am done running multi classes for a while, because helping her and cheering her on it better.
Last week, I ran 3 classes and was charging and working on cars the entire time and missed all of her heats and mains. She took second place in the second heat and i missed the entire thing. So I am done running multi classes for a while, because helping her and cheering her on it better.
lol , you have no idea how much I want to love this truck.
This is my little racer taking 3rd in a points series. She will be beating me soon, lol.

By titilate1971 at 2012-07-27

By titilate1971 at 2012-07-27
Tech Regular
iTrader: (4)
Joined: Jul 2012
Posts: 451
From: tx rchq
i cant waight for my sun the be big to hold i transmiter i just picked up a out newin the box ko propo mars for $30 in hopes he will dive with me i have a 2nd sc10 4x4 for him only need a few part that i robbed



5Likes