Go Back  R/C Tech Forums > General Forums > Nitro Off-Road > Offroad Nitro Engine Forum
Clockwork Racing Engines and Products... >

Clockwork Racing Engines and Products...

Community
Wiki Posts
Search

Clockwork Racing Engines and Products...

Thread Tools
 
Search this Thread
 
Old 06-20-2012 | 10:21 AM
  #5701  
BlueGlowBoy's Avatar
Tech Master
iTrader: (2)
 
Joined: Jun 2010
Posts: 1,676
From: Winnipeg, Manitoba, Canada
Default

ROAR Nats start tomorrow....how many Clocked engines are there?
BlueGlowBoy is offline  
Old 06-20-2012 | 01:44 PM
  #5702  
railer80's Avatar
Tech Regular
iTrader: (4)
 
Joined: Jan 2012
Posts: 267
Default

Originally Posted by Maximo
well the tune is shifting..which either means it is still warming up...or your fuel supply is unable to provide consistent fuel..........ALso you may have a loose head screw, they sometimes can cause a tune change as the engine warms.........I have Werks 6 in stock...also a Orion or N'vision would be safe...so would a Nova 6 or maybe a OD 99
yeah, because for about 3-4 minutes of running on the track after warming up on the box ill get a lean bog on bottom. So im thinking the fuel supply isnt the problem. On the first im flying home to california and my parents have a lot of open space ill use to fully saturate the chassis and tune. Definately going to change plugs though, is it possible that just those el cheapo plugs are causing all these problems?

Also got my stinger bent in a bit from some guy i was passing who thought i was a berm. Lol.
railer80 is offline  
Old 06-20-2012 | 10:15 PM
  #5703  
Maximo's Avatar
Thread Starter
Tech Champion
iTrader: (11)
 
Joined: Jan 2005
Posts: 7,901
Default

CRE Proto7

Very nice engine...has wicked low end grunt , great top end runout and an extremely flat torque curve...Amazing how good a 7 port can deliver low end torque if it is timed correctly...the engine has grunt like a 4 stroke...

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.
Maximo is offline  
Old 06-20-2012 | 11:49 PM
  #5704  
Tech Regular
iTrader: (2)
 
Joined: Dec 2011
Posts: 309
From: Lake View Terrace, CA. ~ Where Rodney King got his Asswoopin!
Default Proto 7

The Proto 7 looks very intriguing, Neal. When will it be available, and How much will one cost?
chiefin on 420 is offline  
Old 06-21-2012 | 01:04 AM
  #5705  
savagesam's Avatar
Tech Elite
iTrader: (8)
 
Joined: Jun 2008
Posts: 2,071
From: bayside, melbourne
Default

Originally Posted by Maximo
CRE Proto7

Very nice engine...has wicked low end grunt , great top end runout and an extremely flat torque curve...Amazing how good a 7 port can deliver low end torque if it is timed correctly...the engine has grunt like a 4 stroke...
Your a CLOCK TEASE Neal...Lmao
savagesam is offline  
Old 06-21-2012 | 08:27 AM
  #5706  
Maximo's Avatar
Thread Starter
Tech Champion
iTrader: (11)
 
Joined: Jan 2005
Posts: 7,901
Default

Originally Posted by chiefin on 420
The Proto 7 looks very intriguing, Neal. When will it be available, and How much will one cost?
I am aiming to have a batch ready in 3 weeks....the cost will be in the $410-$430 range fully modified.....

I will only be building a limited number of these engines, so if you want one, you will have to speak up ahead of time ......

this will be a very exotic engine that nobody else will have.........
Maximo is offline  
Old 06-21-2012 | 08:28 AM
  #5707  
hookem34's Avatar
R/C Tech Elite Member
iTrader: (17)
 
Joined: Dec 2009
Posts: 1,797
From: Texas.....Y'all!
Default

Originally Posted by Maximo
I am aiming to have a batch ready in 3 weeks....the cost will be in the $410-$430 range fully modified.....

I will only be building a limited number of these engines, so if you want one, you will have to speak up ahead of time ......

this will be a very exotic engine that nobody else will have.........
To late, they are all spoken for
hookem34 is offline  
Old 06-21-2012 | 08:31 AM
  #5708  
Maximo's Avatar
Thread Starter
Tech Champion
iTrader: (11)
 
Joined: Jan 2005
Posts: 7,901
Default

Originally Posted by hookem34
To late, they are all spoken for
Actually thats probably not far off LOL !
Maximo is offline  
Old 06-21-2012 | 08:40 AM
  #5709  
Tech Regular
iTrader: (2)
 
Joined: Dec 2011
Posts: 309
From: Lake View Terrace, CA. ~ Where Rodney King got his Asswoopin!
Default OOH OOH!!

Ooh ooh me, me! put me down for one of the Proto 7's. I would like to have one reserved. What is needed from me?
chiefin on 420 is offline  
Old 06-21-2012 | 08:57 AM
  #5710  
Maximo's Avatar
Thread Starter
Tech Champion
iTrader: (11)
 
Joined: Jan 2005
Posts: 7,901
Default

Originally Posted by chiefin on 420
Ooh ooh me, me! put me down for one of the Proto 7's. I would like to have one reserved. What is needed from me?
I will PM you the details....give me a few hours....
Maximo is offline  
Old 06-21-2012 | 03:18 PM
  #5711  
bigjayjay1's Avatar
Tech Champion
iTrader: (87)
 
Joined: Jul 2009
Posts: 5,614
Default

Neil Thanks for the call the other day it was a very good conversation. Ive been going back to the Proto video cuase of the bottom grunt and high top but its still very smooth. Im thinking i can use on a Buggy (?) or Truggy which is a PLUS.

Man the newest video with Nick OMG I'm in LOVE thinking it might be better then my Bonitos need to test one

Last edited by bigjayjay1; 06-21-2012 at 03:29 PM.
bigjayjay1 is offline  
Old 06-21-2012 | 03:26 PM
  #5712  
CaLaBeR's Avatar
Tech Regular
iTrader: (2)
 
Joined: Feb 2007
Posts: 291
Default

Originally Posted by bigjayjay1
Neil Thanks for the call the other day it was a very good conversation. Ive been going back to the Proto video cuase of the bottom grunt and high top but its still very smooth. Im thinking i can use on a Buggy (?) or Truggy which is a PLUS.
It is a very nice engine.. Neal let me test it in my buggy and it worked very well.
CaLaBeR is offline  
Old 06-22-2012 | 06:15 AM
  #5713  
Integra's Avatar
Tech Lord
iTrader: (8)
 
Joined: Dec 2006
Posts: 12,489
Default

That Proto's a Pretty fancy Motor I must say.

Feels like a 600Hp F1 outta the corners.


My Q1 for this weekends race for all the F1 Fans out there.
No Aids whatsoever just Corners.

http://www.youtube.com/watch?v=a2Br2...ature=youtu.be
Integra is offline  
Old 06-22-2012 | 08:23 AM
  #5714  
hookem34's Avatar
R/C Tech Elite Member
iTrader: (17)
 
Joined: Dec 2009
Posts: 1,797
From: Texas.....Y'all!
Default

Originally Posted by Integra
That Proto's a Pretty fancy Motor I must say.

Feels like a 600Hp F1 outta the corners.


My Q1 for this weekends race for all the F1 Fans out there.
No Aids whatsoever just Corners.

http://www.youtube.com/watch?v=a2Br2...ature=youtu.be
Not bad Nick, not bad at all. Hammi has a shot, but Vettel is the favorite. Red Bull Gives You Wings (and Clocked engines)!
hookem34 is offline  
Old 06-22-2012 | 09:35 AM
  #5715  
Integra's Avatar
Tech Lord
iTrader: (8)
 
Joined: Dec 2006
Posts: 12,489
Default

Originally Posted by hookem34
Not bad Nick, not bad at all. Hammi has a shot, but Vettel is the favorite. Red Bull Gives You Wings (and Clocked engines)!


Thx buddy, Its been a Good 6 month process to be able to turn laps like that without TC or the other Aids. Adding a Real Racing Chair and getting my peddles set up to my liking helped as well. Vettel is my current "Rival" but I Just signed with the Silver bullet for my 4th season. Maybe Season 5 Ill look into the BS.
Integra is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.