should i try to use the Reventon R on boosted class or just use the RS.

Use the GT2 PRO with 428 boost now...............unless you like something slower and thermal cutoff.

Ok i will put back the GT2 pro and just look at the Reventon on how pretty it is

We just need more time to work on the STOCK1 software....don't give up on us yet.

I hope they are still available, ordered mine Friday, and the website says in stock in the US warehouse.

hahahaha

+1 on the 428 softwere , will be using it this weekend with my 6.5 ;-)

Yes you do.....and we have 4 left of the S today....but probably will be gone by the weekend.

What is the motor temp range for the V 3.0 17.5 blinky TC class. Iam running a 4.0 in a TC3 and it is around 120/ no fan after 5 min race. What would the max motor temp be. Thanks.

Oh no sir ! I was able to convert other manufacturer users locally to the SP line of ESC! of course I helped them so they dont have to do any guessing with setup.

What is your track size..? Indoor carpet or outdoor asphalt? I think you need more timing.....all SP motor should not be warmer then 180°F.

Good deal.....where TORONTO are you guys racing at...? I have quite a lot of relative lives there and I will be up there next month for a wedding (Markham, Richmond Hill, Mississauga area), may be if I have the time, will bring over a 17.5 and run some laps...PM me the info. Thanks.

I run on carpet. track size 25x60 really small tight twisty layout only one straight. The straight is only about 45-50 feet long, It seems like the guy's with max timing on their motors cant really use the full speed/ rpm. With the 4.0 fdr now i can use full power to get down the straight, iam not loosing much down the straight against a trinity revtech running max timing and also 4.0 fdr. Would it be better to run a higher FDR like 4.4 and run more motor timing to get more acceleration out of the turn?

PM Sent! that would be great if you can swing by and have some fun runs!

Oh yeah...I thought if you are running 4.0 you must be indoor carpet...I have 2 current setup for indoor carpet....35* timing (yellow board) with 4.0 final or 41* timing (blue board) with 4.2 final....I myself (personal skill factor.....slow driver) has better average laptime with 35* timing and 4.0 final setup....the faster SP drivers with better skill run the higher timing 41* with 4.0 to 4.2 final setup....I just cannot handle that extra speed on tight high traction carpet track.

Thanks for the information.