8T 2.0

Reply Subscribe

Thread Tools

Search this Thread

05-31-2012 | 08:08 PM

#14641

vito

Tech Elite

Joined: Nov 2011

Posts: 3,936

From: roseburg or

i use a metal arm on the t/b srevo in a gen 3 tray?

06-01-2012 | 07:46 AM

#14642

Jerm13

Tech Elite

iTrader: (36)

Joined: Feb 2010

Posts: 3,251

From: The 405

Quote:

Originally Posted by vito

will 300 get my truck done?
srevo steering
tires
pipe
lipo for the bummp box
thanks

200 for the servo, pipe and battery at a-main. You should be good.

Go to www.raceaka.com. the have pre-mounts for $40 a set shipped. Get them. Best deal anywhere right now!

06-01-2012 | 07:55 AM

#14643

Integra

Tech Lord

iTrader: (8)

Joined: Dec 2006

Posts: 12,489

Quote:

Originally Posted by Maxxed-out

Use the mugen pins to replace - MUGC0270 for the Axles and MUGC0271 for the center shafts. When you use the tool make sure you heat up the pin or you will strip the tool. It happened to me.

Double check with your calipers before install because I may have that backwards, but those are the part numbers you need.

Quote:

Originally Posted by jnorwood_losi

Ok thanks BC!!
I used a friends at the track this weekend with no heat and it slid right out, but heat does make since...this was on the front center shaft not sure if any of the others are pressed different, either way the tool is AWESOME
See you in a week!!! STOKED!!!

As Jnorwood said Heat is Not needed.

06-01-2012 | 08:00 AM

#14644

vito

Tech Elite

Joined: Nov 2011

Posts: 3,936

From: roseburg or

ill pick it up soon thanks. will a b5 motor with a 2058 pipe be ok?

06-01-2012 | 10:06 AM

#14645

Zuma

Tech Initiate

Joined: Dec 2009

Posts: 47

From: Texas

Quote:

Originally Posted by vito

ill pick it up soon thanks. will a b5 motor with a 2058 pipe be ok?

Vito, you asked the same question last week...

Go back to previous post#14575

06-01-2012 | 10:23 AM

#14646

vito

Tech Elite

Joined: Nov 2011

Posts: 3,936

From: roseburg or

ok found it its a top end pipe.

06-01-2012 | 01:22 PM

#14647

Jake C6R

Tech Addict

iTrader: (8)

Joined: Jan 2011

Posts: 557

From: Simi Valley, CA

Quote:

Originally Posted by Jerm13

200 for the servo, pipe and battery at a-main. You should be good.

Go to www.raceaka.com. the have pre-mounts for $40 a set shipped. Get them. Best deal anywhere right now!

Hey Jerm thanks for the heads up on the AKA deals going on! They are blowing out some old stock. I bought 3 full sets of (4) of 1/8 Truggy Cityblock premounts for $24 per set ($12 per pair!) - 2 soft and 1 medium. Great deal so I can tear up some more tires! Gotta love the blow out deals.

06-01-2012 | 01:29 PM

#14648

vito

Tech Elite

Joined: Nov 2011

Posts: 3,936

From: roseburg or

i have the money to get my stuff. got a few ??.
1 can i use a metal arm on the t/b servo

06-01-2012 | 01:44 PM

#14649

l3asher

Tech Fanatic

iTrader: (2)

Joined: Dec 2008

Posts: 956

From: Broussard, Louisiana

Quote:

Originally Posted by vito

i have the money to get my stuff. got a few ??.
1 can i use a metal arm on the t/b servo

No, at this time I don't think anybody makes one for the genIII tray.

06-01-2012 | 01:46 PM

#14650

vito

Tech Elite

Joined: Nov 2011

Posts: 3,936

From: roseburg or

thanks i have one on the streeing one.

06-01-2012 | 01:49 PM

#14651

aznitronut

Tech Elite

iTrader: (3)

Joined: May 2004

Posts: 2,486

From: Phx. Az

Servo horns make no difference on the Gen 3 radio tray, use anything you want as far servo horn.

06-01-2012 | 01:52 PM

#14652

l3asher

Tech Fanatic

iTrader: (2)

Joined: Dec 2008

Posts: 956

From: Broussard, Louisiana

Quote:

Originally Posted by vito

thanks i have one on the streeing one.

Wait this ONE will work, I was thinking of the pivot horn

06-01-2012 | 02:27 PM

#14653

vito

Tech Elite

Joined: Nov 2011

Posts: 3,936

From: roseburg or

thanks i got my lipo in the box now and it fits good my new savox is fast.

06-01-2012 | 03:22 PM

#14654

losi_racer

Tech Champion

iTrader: (25)

Joined: Nov 2008

Posts: 6,470

From: mesa,az

Quote:

Originally Posted by aznitronut

Servo horns make no difference on the Gen 3 radio tray, use anything you want as far servo horn.

Quote:

Originally Posted by l3asher

Wait this ONE will work, I was thinking of the pivot horn

Correct l3asher you have to use 22
Horn for the THROTTLE. A standard horn will work for steering tho . But a metal horn is NOT needed for the throttle , there is minimal stress on the throttle servo , of your going thru the inserts your EPA is wrong .

06-01-2012 | 03:58 PM

#14655

vito

Tech Elite

Joined: Nov 2011

Posts: 3,936

From: roseburg or

thanks guys for the help all most there.