I have a hobbywing 1/8th 150A esc and 2300kv motor coming and I read that you need to set the LVC manually to run a 5s lipo. How do I do this w/o a programming card?

Page 12 of the user manual

http://www.hobbywing.com/upload/manual/HW-09-80.pdf

Cheers

I have that

I recently got a Xerun 120A 1S speed controller and the 2 in 1 professional programing box. I downloaded and installed the USBLink V1.64 software and I've updated the program box to V1.08_111007. When I plug in the esc and trying to update it I only get the "connecting esc" message.

If it matters. The ECS currently beeps and double flashed green led when powered up and connected to the program box.


What do I need to do to get the program box and the ESC talking to each other? I also want to be able to get the "508" ROAR approved software for stock no timing.

You have to connect the computor and esc to the box.If your allready doing that I have no clue unless you don't have a battery connected and the esc on.