Hpi Pro 4
#6751
Tech Adept
Does anyone know where I can find the pro4 manual as one PDF document rather then one pdf per page.
#6752
Tech Adept
Is anyone interested in some bevel gears. They are the original versions, but I have about 15 of them, and don't need that many.
#6753
Hello to all, I haven't been around for a while so sory if it's been asked before. I repaced the ball cups on my car with RPM ball cups. They seem to be overly tight, to the point where my suspension won't fall down by it self. I know it's the cups because with out the links on the arms hinge OK. What's the deal do they just need time to seat in? Or what's up?
#6755
Tech Master
Originally posted by rc-zombies
pucho..
metric balls and US cups don't mix.
pucho..
metric balls and US cups don't mix.
#6756
Tech Regular
Originally posted by pucho
Hello to all, I haven't been around for a while so sory if it's been asked before. I repaced the ball cups on my car with RPM ball cups. They seem to be overly tight, to the point where my suspension won't fall down by it self. I know it's the cups because with out the links on the arms hinge OK. What's the deal do they just need time to seat in? Or what's up?
Hello to all, I haven't been around for a while so sory if it's been asked before. I repaced the ball cups on my car with RPM ball cups. They seem to be overly tight, to the point where my suspension won't fall down by it self. I know it's the cups because with out the links on the arms hinge OK. What's the deal do they just need time to seat in? Or what's up?
rc-zombies,
The ball sizes are for the most part universal between manufactures, metric and standard. I have used the Losi Ti ball end in the past and they worked fine.
#6757
Tech Adept
HPI after sale support in the UK is the best.
I Emailed them Saturday about the new gears and on the following Friday I recieved not just 2 of each V1..1 gear but the complete 1.1 upgrade set with backplate 0.1mm shims and screws.
A lot of other companies could learn from this after sales support.
I Emailed them Saturday about the new gears and on the following Friday I recieved not just 2 of each V1..1 gear but the complete 1.1 upgrade set with backplate 0.1mm shims and screws.
A lot of other companies could learn from this after sales support.
#6758
Registered User
Hello to all, I haven't been around for a while so sory if it's been asked before. I repaced the ball cups on my car with RPM ball cups. They seem to be overly tight, to the point where my suspension won't fall down by it self. I know it's the cups because with out the links on the arms hinge OK. What's the deal do they just need time to seat in? Or what's up?
#6759
Originally posted by Thad Garner
Pinch them with a pair of pliers. Hara uses the RPM ball cups because he likes the tight fit. I prefer the HPI A301, 2, 3. Ball cups http://www.hpiracing.com/graphics/parts/a301-3.jpg They fit just tight but not too tight.
rc-zombies,
The ball sizes are for the most part universal between manufactures, metric and standard. I have used the Losi Ti ball end in the past and they worked fine.
Pinch them with a pair of pliers. Hara uses the RPM ball cups because he likes the tight fit. I prefer the HPI A301, 2, 3. Ball cups http://www.hpiracing.com/graphics/parts/a301-3.jpg They fit just tight but not too tight.
rc-zombies,
The ball sizes are for the most part universal between manufactures, metric and standard. I have used the Losi Ti ball end in the past and they worked fine.
#6761
Tech Champion
iTrader: (9)
Originally posted by pucho
Pinch how?
Pinch how?
pinching and drilling a hole on top of the cups may be easier.
btw..drilling a hole on top of the cups makes accessing the hex balls alot easier. you will not have to pop the cups off to make ball adjustments.
#6762
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Originally posted by pucho
Pinch how?
Pinch how?
#6763
Tech Regular
Originally posted by pucho
Pinch how?
Pinch how?
#6764
Tech Regular
oops
#6765
Tech Adept
new gears
I just bought a new kit. How do I know if it has the updated gears?