86LikesHpi Pro 4
08-05-2004, 01:33 PM
#6737
I also added 2mm to rear arms block to increase roll center. I still feel a little loose on the rear.
I already have yellow Schumacher springs in the front which are pretty hard.
What oil number you are using? for the rear and for the front?
I already have yellow Schumacher springs in the front which are pretty hard.
What oil number you are using? for the rear and for the front?
08-05-2004, 01:56 PM
#6738
Tech Apprentice
Try lowering the inner roll centre spacers, lowering it will give you more grip.
08-05-2004, 01:59 PM
#6739
Originally posted by X-Garage
I also added 2mm to rear arms block to increase roll center. I still feel a little loose on the rear.
I already have yellow Schumacher springs in the front which are pretty hard.
What oil number you are using? for the rear and for the front?
I also added 2mm to rear arms block to increase roll center. I still feel a little loose on the rear.
I already have yellow Schumacher springs in the front which are pretty hard.
What oil number you are using? for the rear and for the front?
40wt-F
35wt-R
same oil I used since Day 1 when I got the car.
08-05-2004, 02:10 PM
#6740
Does the set up on HPI web?
I was trying to set up to match the track condition at my local place, but I think too much time already to test and try now I'm going to go with Hara setup..
The car runs good now..but I want it to go on a rail!
I was trying to set up to match the track condition at my local place, but I think too much time already to test and try now I'm going to go with Hara setup..
The car runs good now..but I want it to go on a rail!
08-05-2004, 02:21 PM
#6741
Originally posted by X-Garage
Does the set up on HPI web?
I was trying to set up to match the track condition at my local place, but I think too much time already to test and try now I'm going to go with Hara setup..
The car runs good now..but I want it to go on a rail!
Does the set up on HPI web?
I was trying to set up to match the track condition at my local place, but I think too much time already to test and try now I'm going to go with Hara setup..
The car runs good now..but I want it to go on a rail!
http://www.hpiracing.com/index2.htm
08-05-2004, 03:17 PM
#6742
"IT'S A JOKE, DAMNIT A JOKE!!!!
You know, being as it's the same four guys in here... you should see by now that nearly EVERY TIME I POST IN HERE I ASK ERIK HOW TO GEAR.
It does not require you to try to be a good samaritain and answer my silly "how do I gear?" question."
No no, what's your roll out? Roll out is a much better way to determine the proper ratio for your car. That way you can compare between two cars with different tire sizes. Much more accurate.
I'd also recommend BK pitch gears, they are definitely better. They hold up better than 64 p.
You know, being as it's the same four guys in here... you should see by now that nearly EVERY TIME I POST IN HERE I ASK ERIK HOW TO GEAR.
It does not require you to try to be a good samaritain and answer my silly "how do I gear?" question."
No no, what's your roll out? Roll out is a much better way to determine the proper ratio for your car. That way you can compare between two cars with different tire sizes. Much more accurate.
I'd also recommend BK pitch gears, they are definitely better. They hold up better than 64 p.
08-05-2004, 03:28 PM
#6743
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Originally posted by Evicerator
Erik,
How should I gear my derlin diff halves?
Erik,
How should I gear my derlin diff halves?
Congrats on your Win man......
08-05-2004, 10:56 PM
#6744
Originally posted by Kevin K
Is this with a Brushless Motor?
Congrats on your Win man......
Is this with a Brushless Motor?
Congrats on your Win man......
YAY!
Thank you!
Last edited by Steve Weiss; 08-07-2004 at 06:51 PM.
08-06-2004, 12:06 AM
#6745
SETUP?
Hey guys,
Does anyone have a good setup for Foams and a Large VHT Track?
Thanks guys
Does anyone have a good setup for Foams and a Large VHT Track?
Thanks guys
08-06-2004, 08:06 AM
#6746
Originally posted by rc-zombies
yup labor day weekend... all the big name drivers will be attending....
http://www.speedworldraceway.com/1st...Sedan_Race.cfm
yup labor day weekend... all the big name drivers will be attending....
http://www.speedworldraceway.com/1st...Sedan_Race.cfm
due to the second world race warm-up.
08-06-2004, 09:27 AM
#6749
Originally posted by LoSi xXx S
hey rc - zombies where you get the hara's twister esc at and how much ? oh yea what pinion should i buy for a monster stock on my new pro 4 ?!?
hey rc - zombies where you get the hara's twister esc at and how much ? oh yea what pinion should i buy for a monster stock on my new pro 4 ?!?
if you're LHS orders from Horizon..they can order you one.
08-06-2004, 10:18 AM
#6750
http://horizon.hobbyshopnow.com/prod...?prod=HBS90000
Part Number: HBS90000
Product Name: Twister Speed Control
Part Number: HBS90000
Product Name: Twister Speed Control