Does anyone have a good carpet stadium setup for B4.1 thanks

Anyone tried cramming an RC4 in the space up in front of the front shock tower, under the top plate? I measured it and it should fit. Curious if its already been done, and if so was it plug and play or was there mods required?

A little risky mounting the transponder at the very front of the car, along with the wires being under the steering rack. Farthest forward I have ever had mine is in front of the servo.

hey chris, How are the team guys making their receiver wires all black! It looks sick. I would rather not put them in water and dye them....

sharpie marker

The best way to do it is buy new wires from TQ Wires that are already black and higher quality! You just have to have trust in your soldering skills to open up the servo, esc, transponder and solder the new one on.

Are the B4 carbon parts also stronger than the B4.1 plastic ones, or just stiffer? I'm thinking mainly about the shock towers and A-arms.

Thanks for yor help....

Plastic = stronger, can flex
Carbon = stiffer, less flex

i have a FT T4, we are gonna be running a new class 13.5
i need gearing help
im running tekin RS and Tekin redline motor

also, is the chassis on a T4.1 the same dimensions as the FT T4?
thanks

setup tips will help also

track size,boost or no boost

I believe this is the company you are referencing:

http://www.tqracing.com/servocable.htm

Then I stand corrected.

hey guys i have been running AE cars for a little over a year now since i switched from losi and i had a question for the b4.1 and b44.1. i am currently building new cars and i have been looking around at the the "hopups" and are anything of these must have things or are most just for bling.. i have the 8mm chassis and jconcepts silent spur and a stainless screw kit but what about things like lunsford hinge pins and turnbuckles, ceramic bearings, ti balls studs,vented slipper plates etc. sorry if this is a dumb question i just want to get everything i need now and not wonder if im missing something or if im wasting money on parts

Get a B Fast diff kit and vented slipper plates and you'll be golden